Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V SODIMM POSIFLEX KS-7412P

SKU CH-B8GB-JQC96

DDR3 SODIMM memory module adding 8 GB at 1333 MHz for POSIFLEX KS-7412P terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 PC3-10600 matches POSIFLEX KS-7412P memory spec
  • 35V low-voltage operation reduces system power draw
  • 204-pin SODIMM form factor fits compact fanless terminal slot
  • Non-ECC unbuffered design ensures straightforward compatibility

POSIFLEX KS-7412P memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX KS-7412P compact fanless point-of-sale terminal. It targets system integrators and IT staff who need a validated module for that specific platform. The stick installs in the single 204-pin slot to raise memory capacity for POS workloads.

8 GB DDR3 1333 headroom

The module runs at 1333 MHz (PC3-10600) with CL9 latency and 1.35 V operation. One 8 GB rank (2Rx8) fills the terminal's sole SODIMM socket, so total system memory stops at 8 GB. Workloads needing more capacity cannot be met by this platform.

Non-ECC unbuffered SODIMM build

The stick uses major OEM chips from Samsung, Micron or Hynix and carries no heat spreader, matching the fanless chassis design. Its 204-pin edge connector and unbuffered, non-ECC layout match the KS-7412P motherboard exactly, so installation is a direct swap with no extra configuration.

Fordele

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 PC3-10600 matches POSIFLEX KS-7412P memory spec
  • 35V low-voltage operation reduces system power draw
  • 204-pin SODIMM form factor fits compact fanless terminal slot
  • Non-ECC unbuffered design ensures straightforward compatibility

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Spørgsmål om denne vare

Will this DDR3 1333 MHz SODIMM run in my POSIFLEX KS-7412P alongside any existing 1.50 V modules I keep?

The module is rated at 1.35 V while the specification also lists 1.50 V; if the terminal mixes voltages the system will default to the higher setting, so check the current modules before installing.

How can I confirm the 8 GB 204-pin CL9 stick is recognised correctly after fitting it?

Enter the BIOS or OS memory information screen and verify the capacity shows 8 GB, speed reads 1333 MHz (PC3-10600), latency shows CL9 and the module is reported as non-ECC unbuffered.

Does the package include only the SODIMM or are tools and adapters supplied too?

The package content lists a single 8 GB 204-pin DDR3 SODIMM; no screwdriver, bracket or adapter is included, so have a suitable Phillips bit ready for the terminal's memory cover.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.