Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V SODIMM POSIFLEX KS-7412P

SKU CH-B8GB-JQC96

DDR3 SODIMM memory module adding 8 GB at 1333 MHz for POSIFLEX KS-7412P terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 PC3-10600 matches POSIFLEX KS-7412P memory spec
  • 35V low-voltage operation reduces system power draw
  • 204-pin SODIMM form factor fits compact fanless terminal slot
  • Non-ECC unbuffered design ensures straightforward compatibility

POSIFLEX KS-7412P memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX KS-7412P compact fanless point-of-sale terminal. It targets system integrators and IT staff who need a validated module for that specific platform. The stick installs in the single 204-pin slot to raise memory capacity for POS workloads.

8 GB DDR3 1333 headroom

The module runs at 1333 MHz (PC3-10600) with CL9 latency and 1.35 V operation. One 8 GB rank (2Rx8) fills the terminal's sole SODIMM socket, so total system memory stops at 8 GB. Workloads needing more capacity cannot be met by this platform.

Non-ECC unbuffered SODIMM build

The stick uses major OEM chips from Samsung, Micron or Hynix and carries no heat spreader, matching the fanless chassis design. Its 204-pin edge connector and unbuffered, non-ECC layout match the KS-7412P motherboard exactly, so installation is a direct swap with no extra configuration.

Kohokohdat

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 PC3-10600 matches POSIFLEX KS-7412P memory spec
  • 35V low-voltage operation reduces system power draw
  • 204-pin SODIMM form factor fits compact fanless terminal slot
  • Non-ECC unbuffered design ensures straightforward compatibility

Tekniset tiedot

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Kysymyksiä tästä tuotteesta

Will this DDR3 1333 MHz SODIMM run in my POSIFLEX KS-7412P alongside any existing 1.50 V modules I keep?

The module is rated at 1.35 V while the specification also lists 1.50 V; if the terminal mixes voltages the system will default to the higher setting, so check the current modules before installing.

How can I confirm the 8 GB 204-pin CL9 stick is recognised correctly after fitting it?

Enter the BIOS or OS memory information screen and verify the capacity shows 8 GB, speed reads 1333 MHz (PC3-10600), latency shows CL9 and the module is reported as non-ECC unbuffered.

Does the package include only the SODIMM or are tools and adapters supplied too?

The package content lists a single 8 GB 204-pin DDR3 SODIMM; no screwdriver, bracket or adapter is included, so have a suitable Phillips bit ready for the terminal's memory cover.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.