Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green printed circuit board with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 8GB DDR4 2933 CL21 ECC RDIMM ASRock Rack ROMED8-2T

SKU CH-E436-XAH0E

8GB DDR4 2933 CL21 ECC registered RDIMM for ASRock Rack ROMED8-2T EPYC servers

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 8GB

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signals for dense server configurations
  • 2933 MT/s throughput matches EPYC platform specifications
  • 2 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits ASRock Rack ROMED8-2T slots

Server-grade ECC RDIMM for EPYC platforms

This 8 GB DDR4 module is built for the ASRock Rack ROMED8-2T motherboard and AMD EPYC processors. Registered operation and ECC support protect data integrity in multi-socket server workloads. The single-rank 1Rx8 organisation keeps electrical loading low per channel.

288-pin DDR4 slot at 1.2 V

Installation requires a compatible 288-pin DDR4 RDIMM slot running at 1.20 V. Registered buffering removes address and command loading from the memory controller, freeing electrical headroom for higher DIMM counts per channel. No heat spreader is fitted, so airflow across the module must be provided by the chassis.

8 GB at 2933 MT/s with CL21

The module delivers 8 GB of capacity at 2933 MT/s (PC4-23400) with a CAS latency of 21 cycles. This density suits moderate virtualization, database caching or file-serving tasks where error correction matters more than raw bandwidth. Workloads needing larger per-DIMM capacities or faster transfer rates will require higher-density or higher-speed registered DIMMs.

Fordele

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signals for dense server configurations
  • 2933 MT/s throughput matches EPYC platform specifications
  • 2 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits ASRock Rack ROMED8-2T slots

Specifikationer

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-818K1
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What is the CAS latency of this DDR4 module?

The module runs at CL21, which is the CAS latency specified for this 2933 MT/s DDR4 registered DIMM.

How much power does the 1.2 V registered ECC DIMM draw under continuous load?

Operating at 1.20 V, this registered ECC RDIMM draws minimal power; the register adds slight overhead but total consumption stays low for an 8 GB server module.

Which motherboard must I already have for this memory to work?

This kit is validated for the ASRock Rack ROMED8-2T motherboard designed for AMD EPYC processors.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.