Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5-4800 CL40 1.1V 2Rx8 UDIMM Supermicro X14SAE

SKU CH-4HAS-TKM61

A 96GB kit of two 48GB DDR5-4800 CL40 UDIMMs validated for the Supermicro X14SAE motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo
  • 96 GB total capacity from a matched 2 × 48 GB kit
  • DDR5 4800 speed with CL40 latency for responsive desktop performance
  • Low 1.1 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits the Supermicro X14SAE exactly
  • Built with Samsung, Micron or Hynix chips and tested for stability

Exact-match DDR5 kit for Supermicro X14SAE

This 96 GB kit contains two 48 GB DDR5-4800 UDIMMs built to the precise rank, voltage and timing the motherboard expects. The 2Rx8 Non-ECC modules operate at 1.1 V with CL40 latency and are recognised at full capacity without manual tuning. It is not suited for systems that require ECC registered DIMMs or SODIMM form factors.

Verified fitment with major OEM chips

The modules use Samsung, Micron or Hynix components and are tested for stability at the rated PC5-38400 speed. Because the kit matches the board's population rules, it installs directly and runs at its specified frequency. Buyers who need capacities beyond 96 GB or a different voltage must choose another product.

Practical limits of the DDR5-4800 standard

At 4800 MT/s the memory delivers the baseline bandwidth defined by the JEDEC specification for this data rate. Latency is fixed at CL40 and voltage at 1.1 V, so the kit cannot reach higher speeds or tighter timings without platform support for overclocking. Boards that do not populate slots in the approved order will not recognise the full capacity.

Fordele

  • 96 GB total capacity from a matched 2 × 48 GB kit
  • DDR5 4800 speed with CL40 latency for responsive desktop performance
  • Low 1.1 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits the Supermicro X14SAE exactly
  • Built with Samsung, Micron or Hynix chips and tested for stability

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD38400-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Do the modules need active cooling because they lack a heat spreader?

The kit uses bare DDR5 UDIMMs without a heat spreader; adequate case airflow is the only cooling required.

What limits sustained throughput first — the CL40 latency or the 4800 MT/s data rate?

The 4800 MT/s data rate sets the maximum bandwidth ceiling; CL40 latency affects access time but not peak throughput.

What is the power draw of the 96 GB kit at the rated 1.10 V?

Each 48 GB module runs at 1.10 V; total power scales with actual memory-controller activity rather than a fixed TDP.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.