We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black memory chips, no heat spreaders, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5-4800 CL40 1.1V 2Rx8 UDIMM Supermicro X14SAE

SKU CH-4HAS-TKM61

A 96GB kit of two 48GB DDR5-4800 CL40 UDIMMs validated for the Supermicro X14SAE motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Size 96GB 2X48GB

  • 96 GB total capacity from a matched 2 × 48 GB kit
  • DDR5 4800 speed with CL40 latency for responsive desktop performance
  • Low 1.1 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits the Supermicro X14SAE exactly
  • Built with Samsung, Micron or Hynix chips and tested for stability

Exact-match DDR5 kit for Supermicro X14SAE

This 96 GB kit contains two 48 GB DDR5-4800 UDIMMs built to the precise rank, voltage and timing the motherboard expects. The 2Rx8 Non-ECC modules operate at 1.1 V with CL40 latency and are recognised at full capacity without manual tuning. It is not suited for systems that require ECC registered DIMMs or SODIMM form factors.

Verified fitment with major OEM chips

The modules use Samsung, Micron or Hynix components and are tested for stability at the rated PC5-38400 speed. Because the kit matches the board's population rules, it installs directly and runs at its specified frequency. Buyers who need capacities beyond 96 GB or a different voltage must choose another product.

Practical limits of the DDR5-4800 standard

At 4800 MT/s the memory delivers the baseline bandwidth defined by the JEDEC specification for this data rate. Latency is fixed at CL40 and voltage at 1.1 V, so the kit cannot reach higher speeds or tighter timings without platform support for overclocking. Boards that do not populate slots in the approved order will not recognise the full capacity.

Highlights

  • 96 GB total capacity from a matched 2 × 48 GB kit
  • DDR5 4800 speed with CL40 latency for responsive desktop performance
  • Low 1.1 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits the Supermicro X14SAE exactly
  • Built with Samsung, Micron or Hynix chips and tested for stability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD38400-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Do the modules need active cooling because they lack a heat spreader?

The kit uses bare DDR5 UDIMMs without a heat spreader; adequate case airflow is the only cooling required.

What limits sustained throughput first — the CL40 latency or the 4800 MT/s data rate?

The 4800 MT/s data rate sets the maximum bandwidth ceiling; CL40 latency affects access time but not peak throughput.

What is the power draw of the 96 GB kit at the rated 1.10 V?

Each 48 GB module runs at 1.10 V; total power scales with actual memory-controller activity rather than a fixed TDP.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.