Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR5 UDIMM modules without heat spreaders, 288-pin, 96GB kit

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5200 ECC UDIMM CL42 1.1V 2Rx8 server RAM

SKU CH-1ZKS-MFHQZ

A 96 GB DDR5 ECC UDIMM kit running at 5200 MT/s with CL42 latency and 1.1 V operation

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5200 (PC5 41600)
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCYes

Capacity 96GB (2 x 48GB)

  • 96 GB total capacity from two 48 GB modules
  • DDR5 5200 speed rated at PC5-41600 bandwidth
  • ECC protection detects and corrects single-bit errors
  • Low 1.10 V operation reduces power draw
  • Unbuffered 288-pin UDIMM fits compatible server boards

96GB DDR5 ECC UDIMM kit

This NEMIX RAM kit provides 96GB of DDR5 ECC UDIMM memory in a matched pair of 48GB modules. It operates at 5200 MT/s with CL42 latency at 1.1V. The unbuffered design with on-die ECC suits servers and workstations that require data integrity without registered DIMM support.

Suited for ECC UDIMM platforms only

This memory fits systems that accept DDR5 ECC unbuffered UDIMMs with 2Rx8 organisation. It will not work in boards limited to non-ECC or registered DIMMs. Buyers who need registered RDIMM or LRDIMM modules should look elsewhere.

288-pin DDR5 form factor

The 288-pin DDR5 modules install directly into compatible UDIMM slots. No heat spreader is fitted, so airflow across the PCB is unimpeded. The kit frees two DIMM slots for the full 96GB capacity, leaving remaining slots open for future expansion where the platform allows.

Fordele

  • 96 GB total capacity from two 48 GB modules
  • DDR5 5200 speed rated at PC5-41600 bandwidth
  • ECC protection detects and corrects single-bit errors
  • Low 1.10 V operation reduces power draw
  • Unbuffered 288-pin UDIMM fits compatible server boards

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME41600-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5200 (PC5 41600)
CAS LatencyCL42
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does my motherboard need DDR5 ECC UDIMM slots and support for 2Rx8 modules to use this 96GB kit?

Yes, this kit requires a motherboard with 288-pin DDR5 ECC UDIMM slots that accept 2Rx8 modules at 1.1V.

Can I mix this 5200 CL42 kit with slower DDR5 ECC UDIMMs I already own?

The system will run all modules at the speed and timings of the slowest kit installed.

How do I verify the kit runs at 5200 MT/s with CL42 after installation?

Check the memory speed and CAS latency in BIOS or with a tool such as CPU-Z to confirm 5200 MT/s and CL42.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.