BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277815BTC
På lager
NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 5600MHz CL46 2Rx8 1.1V 288-Pin UDIMM for ASRock IMB-A1302 IMB-A1700
96 GB DDR5 kit with two 48 GB unbuffered UDIMMs at 5600 MHz CL46 for ASRock IMB-A1302 and IMB-A1700
- Capacity96GB (2 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB total capacity from two 48 GB modules
- DDR5 5600 MHz speed rated as PC5-44800
- CL46 CAS latency at 1.1 V operating voltage
- 288-pin unbuffered UDIMM fits ASRock IMB-A1302 and IMB-A1700
- Dual-rank 2Rx8 organisation using major OEM memory chips
96GB DDR5 kit for ASRock industrial boards
This 96GB kit contains two 48GB DDR5 5600MHz UDIMM modules built for ASRock Industrial IMB-A1302 and IMB-A1700 motherboards. Each module runs at 1.1V with CL46 latency and a 2Rx8 organisation. The kit delivers 96GB of non-ECC unbuffered memory in a standard 288-pin form factor.
Who this suits and who it does not
Builders upgrading compatible ASRock industrial micro-ATX systems to 96GB of DDR5 will find the correct speed, voltage and pin layout here. Systems that require ECC error correction or registered modules cannot use this non-ECC unbuffered kit. Boards limited to lower maximum capacity or a different DDR generation are not supported.
Deciding specification — DDR5 5600 288-pin UDIMM
The single specification that determines fit is the DDR5 5600MHz 288-pin UDIMM interface with 1.1V operation. Only motherboards that accept DDR5 UDIMMs at this speed and voltage can use the modules. Verify the board manual for DDR5 UDIMM support before purchasing.
Fordele
- 96 GB total capacity from two 48 GB modules
- DDR5 5600 MHz speed rated as PC5-44800
- CL46 CAS latency at 1.1 V operating voltage
- 288-pin unbuffered UDIMM fits ASRock IMB-A1302 and IMB-A1700
- Dual-rank 2Rx8 organisation using major OEM memory chips
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 96GB (2 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Spørgsmål om denne vare
Will the 288-pin DDR5 UDIMM modules fit the IMB-A1302 or IMB-A1700 motherboard slots?
Yes, the kit uses the standard 288-pin DDR5 UDIMM form factor that matches the DIMM slots on both ASRock Industrial Micro-ATX boards.
What is the correct way to seat the two 48 GB modules so the system recognises the full 96 GB capacity?
Align the notch on each module with the slot key, press straight down until the retention clips click on both sides, and populate the slots recommended in the motherboard manual for dual-channel operation.
Does the lack of a heat spreader on these 1.1 V CL46 modules mean I need to add airflow or replace them sooner?
No, DDR5 UDIMMs at 1.1 V run cool enough for standard chassis airflow; no extra cooling or scheduled replacement is required.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
