Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with black memory chips, 262-pin DDR5 SODIMM form factor, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E101-04 8GB DDR5 4800 CL40 262-pin SODIMM memory upgrade

SKU CH-PE3G-XCFBC MPN CSE-E101-04

8 GB DDR5 SODIMM running at 4800 MHz CL40 for Supermicro SYS-E100-13AD-C systems

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 8 GB capacity adds responsive multitasking headroom
  • DDR5 4800 MT/s speed lifts data throughput
  • CL40 latency keeps timing tight
  • 1 V operation reduces power draw
  • 262-pin SODIMM fits Supermicro IoT SuperServer SYS-E100-13AD-C

System-specific DDR5 SODIMM for Supermicro IoT

This NEMIX RAM module delivers 8 GB of DDR5 4800 memory in a single 262-pin SODIMM. It is built for the SuperMicro IoT SuperServer SYS-E100-13AD-C and compatible X13SAN-C motherboards. The unbuffered, non-ECC design suits embedded and edge deployments that need a straightforward capacity increase.

Steady operation at 1.10 V with CL40 timing

The module runs at the standard DDR5 4800 data rate with a CAS latency of 40. Major OEM DRAM from Samsung, Micron or Hynix is stress-tested under sustained load to maintain stability in always-on environments. The 1Rx8 organisation and 1.10 V voltage keep power draw predictable during continuous workloads.

No heat spreader, direct slot installation

The bare PCB fits directly into the 262-pin SODIMM socket without extra clearance requirements. Unbuffered signalling means no register delay, simplifying the memory training sequence on supported Supermicro platforms. Builders who need ECC protection or registered DIMMs must select a different module.

Fordele

  • 8 GB capacity adds responsive multitasking headroom
  • DDR5 4800 MT/s speed lifts data throughput
  • CL40 latency keeps timing tight
  • 1 V operation reduces power draw
  • 262-pin SODIMM fits Supermicro IoT SuperServer SYS-E100-13AD-C

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-818K1
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM

Spørgsmål om denne vare

Does the 1.10 V DDR5 module add noticeable heat or fan noise when the SuperMicro SYS-E100-13AD-C runs continuously?

The SODIMM operates at the standard DDR5 voltage of 1.10 V and has no heat spreader, so its thermal contribution inside the SYS-E100-13AD-C is minimal and does not increase fan activity.

What must the SuperMicro SYS-E100-13AD-C already provide for this 262-pin SODIMM to function?

The server needs a free DDR5 SODIMM slot that accepts 1Rx8 unbuffered non-ECC modules at 4800 MT/s.

Will this CL40 4800 MT/s stick run stably alongside the original memory already installed in the SYS-E100-13AD-C?

Yes, the module is validated for the SYS-E100-13AD-C and matches the platform's DDR5 4800 specification, so it will operate with existing memory at the system's configured speed and latency.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.