Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR5 SODIMM sticks, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM CSE-E102TF2 16GB (2x8GB) DDR5 4800 PC5-38400 CL40 1.1V 262-pin SODIMM memory upgrade

SKU CH-2D5H-AA6W9 MPN CSE-E102TF2

A 16 GB DDR5 SODIMM kit with two 8 GB modules running at 4800 MT/s and CL40 latency for Supermicro systems

  • Capacity16GB (2 x 8GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Designed for Supermicro IoT SuperServer SYS-E102-13R-H compatibility
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 4800 MT/s CL40 delivers responsive throughput
  • Low 1.1 V operation reduces thermal load
  • 262-pin SODIMM form factor fits compact server chassis

SuperMicro SYS-E102-13R-H DDR5 Kit

This NEMIX RAM kit supplies 16 GB of DDR5 memory in two 8 GB SODIMMs for the SuperMicro IoT SuperServer SYS-E102-13R-H. The modules run at 4800 MT/s with CL40 latency at 1.1 V and carry the part number MS38400-818K2.

Builders of that exact SuperServer model

The kit is qualified only for the SYS-E102-13R-H platform; any other motherboard or server chassis should look for memory validated on its own QVL. Systems requiring ECC protection or registered DIMMs will not be served by this unbuffered non-ECC set.

262-pin SODIMM form factor

Fit is decided by the 262-pin DDR5 SODIMM interface; if the target board uses a different pin count or DDR generation the modules will not seat. No other specification overrides this physical requirement.

Fordele

  • Designed for Supermicro IoT SuperServer SYS-E102-13R-H compatibility
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 4800 MT/s CL40 delivers responsive throughput
  • Low 1.1 V operation reduces thermal load
  • 262-pin SODIMM form factor fits compact server chassis

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR5 4800MHZ PC5-38400 1Rx6 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT

Spørgsmål om denne vare

Will the DDR5 4800 SODIMM kit work alongside any existing DDR5 modules I keep in the SuperMicro SYS-E102-13R-H?

The kit is validated for the SuperMicro SYS-E102-13R-H. Mixing modules of the same DDR5 generation and speed is generally supported, but matching CAS latency CL40 and 1.1 V voltage helps ensure stable operation without manual tuning.

How can I verify the kit runs at DDR5 4800 CL40 after installing it in the SuperMicro server?

Enter the system BIOS or use a tool like CPU-Z to confirm the memory reports 4800 MT/s, PC5-38400 bandwidth, CL40 timings and 1.1 V operating voltage for both 8 GB modules.

What is included in the CSE-E102TF2 package and do I need any extra parts for installation?

The box contains two 8 GB DDR5 4800 262-pin SODIMM modules (16 GB total). No heat spreaders, cables or tools are supplied; the modules insert directly into the server's SODIMM slots.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.