BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0028064BTC
Skladom
NEMIX RAM
NEMIX RAM CSE-E102TF2 16GB (2x8GB) DDR5 4800 PC5-38400 CL40 1.1V 262-pin SODIMM memory upgrade
A 16 GB DDR5 SODIMM kit with two 8 GB modules running at 4800 MT/s and CL40 latency for Supermicro systems
- Capacity16GB (2 x 8GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Designed for Supermicro IoT SuperServer SYS-E102-13R-H compatibility
- 16 GB dual-channel kit boosts multitasking headroom
- DDR5 4800 MT/s CL40 delivers responsive throughput
- Low 1.1 V operation reduces thermal load
- 262-pin SODIMM form factor fits compact server chassis
SuperMicro SYS-E102-13R-H DDR5 Kit
This NEMIX RAM kit supplies 16 GB of DDR5 memory in two 8 GB SODIMMs for the SuperMicro IoT SuperServer SYS-E102-13R-H. The modules run at 4800 MT/s with CL40 latency at 1.1 V and carry the part number MS38400-818K2.
Builders of that exact SuperServer model
The kit is qualified only for the SYS-E102-13R-H platform; any other motherboard or server chassis should look for memory validated on its own QVL. Systems requiring ECC protection or registered DIMMs will not be served by this unbuffered non-ECC set.
262-pin SODIMM form factor
Fit is decided by the 262-pin DDR5 SODIMM interface; if the target board uses a different pin count or DDR generation the modules will not seat. No other specification overrides this physical requirement.
Prednosti
- Designed for Supermicro IoT SuperServer SYS-E102-13R-H compatibility
- 16 GB dual-channel kit boosts multitasking headroom
- DDR5 4800 MT/s CL40 delivers responsive throughput
- Low 1.1 V operation reduces thermal load
- 262-pin SODIMM form factor fits compact server chassis
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR5 4800MHZ PC5-38400 1Rx6 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT |
Otázky k tomuto produktu
Will the DDR5 4800 SODIMM kit work alongside any existing DDR5 modules I keep in the SuperMicro SYS-E102-13R-H?
The kit is validated for the SuperMicro SYS-E102-13R-H. Mixing modules of the same DDR5 generation and speed is generally supported, but matching CAS latency CL40 and 1.1 V voltage helps ensure stable operation without manual tuning.
How can I verify the kit runs at DDR5 4800 CL40 after installing it in the SuperMicro server?
Enter the system BIOS or use a tool like CPU-Z to confirm the memory reports 4800 MT/s, PC5-38400 bandwidth, CL40 timings and 1.1 V operating voltage for both 8 GB modules.
What is included in the CSE-E102TF2 package and do I need any extra parts for installation?
The box contains two 8 GB DDR5 4800 262-pin SODIMM modules (16 GB total). No heat spreaders, cables or tools are supplied; the modules insert directly into the server's SODIMM slots.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
