NEMIX RAM
NEMIX RAM CSE-GS7A-000NBP3 512GB (16x32GB) DDR5 4800 CL40 ECC RDIMM memory upgrade
512 GB DDR5 kit with sixteen 32 GB ECC registered DIMMs at 4800 MT/s CL40 for Supermicro SuperWorkstation SYS-751A-I
- Capacity512GB (16 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 512 GB total capacity for large-scale workloads
- 16 modules of 32 GB each for maximum density
- DDR5 4800 speed with CL40 latency
- ECC registered design for data integrity
- 1 V operation reduces power draw
512GB DDR5 4800 ECC RDIMM kit
This 512GB kit contains sixteen 32GB DDR5 4800 CL40 registered DIMMs built for Supermicro SuperWorkstation SYS-751A-I and Super X13DAI-T platforms. It targets IT professionals who need maximum registered ECC capacity in a single qualified configuration.
Capacity and registered headroom
The 1Rx4 organisation across sixteen modules delivers 512GB at 1.10V, letting memory-intensive workloads scale without exceeding the platform’s registered DIMM limits. Population rules on the target systems cap further expansion, so the kit represents the practical ceiling for this chassis.
What the kit changes
Supplied as a matched 16-piece set, the modules eliminate mixed-rank variability and enable the platform’s full ECC scrubbing and error-containment features. No heat spreaders are included, so airflow must meet the server’s original thermal design.
Fordele
- 512 GB total capacity for large-scale workloads
- 16 modules of 32 GB each for maximum density
- DDR5 4800 speed with CL40 latency
- ECC registered design for data integrity
- 1 V operation reduces power draw
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-314K16 |
| Capacity | 512GB (16 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (16X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
Spørgsmål om denne vare
Will the 16x32GB DDR5 4800 CL40 ECC RDIMM kit run in my Supermicro SYS-751A-I alongside existing DDR5 4800 registered modules?
Yes, the kit is validated for the Supermicro SYS-751A-I and uses standard DDR5 4800 PC5-38400 1.1V registered timings, so it will operate with other DDR5 4800 registered DIMMs in the same platform.
How can I verify the 512GB kit is operating at DDR5 4800 CL40 with ECC active after installation?
Enter the system BIOS and confirm the memory speed reads 4800 MT/s, CAS latency shows CL40, and ECC status is reported as enabled for all 16 modules.
What ships in the CSE-GS7A-000NBP3 package and do I need extra parts for installation?
The box contains the 16 32GB DDR5 4800 CL40 1Rx4 ECC RDIMM modules; no heat spreaders or additional hardware are included, and no separate components are required for installation in a compatible Supermicro system.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



