We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a tray

NEMIX RAM

NEMIX RAM CSE-GS7A-000NBP3 512GB (16x32GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-S6QC-KK731 MPN CSE-GS7A-000NBP3

512 GB DDR5 kit with sixteen 32 GB ECC registered DIMMs at 4800 MT/s CL40 for Supermicro SuperWorkstation SYS-751A-I

  • Capacity512GB (16 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 512 GB total capacity for large-scale workloads
  • 16 modules of 32 GB each for maximum density
  • DDR5 4800 speed with CL40 latency
  • ECC registered design for data integrity
  • 1 V operation reduces power draw

512GB DDR5 4800 ECC RDIMM kit

This 512GB kit contains sixteen 32GB DDR5 4800 CL40 registered DIMMs built for Supermicro SuperWorkstation SYS-751A-I and Super X13DAI-T platforms. It targets IT professionals who need maximum registered ECC capacity in a single qualified configuration.

Capacity and registered headroom

The 1Rx4 organisation across sixteen modules delivers 512GB at 1.10V, letting memory-intensive workloads scale without exceeding the platform’s registered DIMM limits. Population rules on the target systems cap further expansion, so the kit represents the practical ceiling for this chassis.

What the kit changes

Supplied as a matched 16-piece set, the modules eliminate mixed-rank variability and enable the platform’s full ECC scrubbing and error-containment features. No heat spreaders are included, so airflow must meet the server’s original thermal design.

Highlights

  • 512 GB total capacity for large-scale workloads
  • 16 modules of 32 GB each for maximum density
  • DDR5 4800 speed with CL40 latency
  • ECC registered design for data integrity
  • 1 V operation reduces power draw

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K16
Capacity512GB (16 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (16X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will the 16x32GB DDR5 4800 CL40 ECC RDIMM kit run in my Supermicro SYS-751A-I alongside existing DDR5 4800 registered modules?

Yes, the kit is validated for the Supermicro SYS-751A-I and uses standard DDR5 4800 PC5-38400 1.1V registered timings, so it will operate with other DDR5 4800 registered DIMMs in the same platform.

How can I verify the 512GB kit is operating at DDR5 4800 CL40 with ECC active after installation?

Enter the system BIOS and confirm the memory speed reads 4800 MT/s, CAS latency shows CL40, and ECC status is reported as enabled for all 16 modules.

What ships in the CSE-GS7A-000NBP3 package and do I need extra parts for installation?

The box contains the 16 32GB DDR5 4800 CL40 1Rx4 ECC RDIMM modules; no heat spreaders or additional hardware are included, and no separate components are required for installation in a compatible Supermicro system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.