Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Six green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 CL40 288GB 6x48GB ECC RDIMM Supermicro H13SST-G memory upgrade

SKU CH-6WER-3SSFY

A 288 GB kit of six 48 GB DDR5-4800 ECC Registered RDIMMs at 1.1 V CL40, validated for the Supermicro H13SST-G motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Vis 24 flere konfigurationer
  • 288 GB total capacity from six 48 GB modules
  • DDR5 4800 speed with CL40 latency at 1.10 V
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx8 dual-rank organization matches controller expectations
  • Exact fit for Supermicro H13SST-G motherboard memory slots

288GB DDR5 ECC RDIMM kit for Supermicro H13SST-G

This 288GB kit contains six 48GB DDR5 4800MHz PC5-38400 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13SST-G motherboard expects. The 2Rx8 modules operate at 1.1V with CL40 latency and install in the board's 288-pin RDIMM slots.

Upgrade from smaller or slower DDR5 kits

Replacing a lower-capacity or mixed-speed DDR5 kit with this matched 6x48GB set lets the memory controller run every slot at the rated 4800MHz without downclocking. The jump is worth it when your workloads need the full 288GB capacity and the stability of registered ECC across all channels.

Check motherboard population rules and DIMM slots

Verify the H13SST-G manual for approved DIMM population order, maximum supported capacity per slot and any BIOS version requirements before ordering. Confirm the system uses 288-pin RDIMM slots and that the board's memory controller supports 2Rx8 registered modules at 1.1V.

Fordele

  • 288 GB total capacity from six 48 GB modules
  • DDR5 4800 speed with CL40 latency at 1.10 V
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx8 dual-rank organization matches controller expectations
  • Exact fit for Supermicro H13SST-G motherboard memory slots

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will these 288-pin DDR5 RDIMMs fit the Supermicro H13SST-G memory slots?

Yes, the kit uses the 288-pin RDIMM form factor that the H13SST-G requires; it is not a UDIMM or SODIMM.

What population order should I follow when installing the six 48 GB modules on the H13SST-G?

Check your motherboard manual for the approved DIMM population sequence before installing all six modules.

Do these registered ECC modules need any firmware updates or ongoing maintenance after installation?

No firmware updates are required; the ECC function corrects single-bit errors automatically during normal operation.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.