Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 2TB (16x128GB) CL46 2Rx4 1.1V 288-pin ECC RDIMM Kit for Supermicro H14DST-F

SKU CH-Y8GZ-ER8GX

A 2 TB DDR5 registered ECC kit with sixteen 128 GB modules running at 5600 MHz, CL46, 1.1 V for the Supermicro H14DST-F

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 2TB 16X128GB

Vis 30 flere konfigurationer
  • 2TB capacity with 16 matched 128GB modules for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors and offloads the memory controller
  • 10V operation at CL46 latency matches the motherboard's native timing profile
  • 288-pin RDIMM form factor validated for Supermicro H14DST-F memory population rules

2TB DDR5 ECC RDIMM kit for Supermicro H14DST-F

This 2TB kit contains 16 registered DDR5 DIMMs, each 128GB, built for the Supermicro H14DST-F motherboard. It runs at DDR5-5600 with CL46 latency at 1.10V. The 2Rx4 organisation and registered buffer let the board run every slot populated at rated speed. Target users operate memory-intensive servers that require error-correcting capacity at scale.

Verify DIMM population rules before ordering

Consult the H14DST-F manual for supported capacities per channel and the approved installation sequence. The board requires 288-pin registered RDIMMs; unbuffered UDIMMs or SODIMMs will not fit or function. Confirm the BIOS revision supports the full 16-module configuration at DDR5-5600. Buyers who need a different capacity or a non-registered form factor cannot use this kit.

Registered ECC modules without heat spreaders

Each DIMM uses major OEM Samsung, Micron or Hynix chips in a bare PCB design. The registered architecture reduces electrical load on the memory controller when all 16 slots are filled. ECC corrects single-bit errors in flight, preventing silent data corruption. The 1.10V operating voltage matches the DDR5 baseline for server platforms.

Fordele

  • 2TB capacity with 16 matched 128GB modules for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors and offloads the memory controller
  • 10V operation at CL46 latency matches the motherboard's native timing profile
  • 288-pin RDIMM form factor validated for Supermicro H14DST-F memory population rules

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does the 2TB kit include all 16 DDR5 5600 RDIMM modules or must any be purchased separately?

The kit ships as a complete 2TB package containing 16 modules of 128GB each, so nothing else is required for a full installation.

Why is the kit specified as 2Rx4 CL46 rather than a different rank or latency?

The 2Rx4 organisation and CL46 timing match the Supermicro H14DST-F memory controller requirements, ensuring the board recognises the full 2TB capacity at the rated DDR5 5600 speed.

What does the DDR5 5600 (PC5-44800) rating deliver once the modules are installed in the H14DST-F?

The server will run the memory at 5600 MT/s with a 1.10 V supply, providing the rated bandwidth and registered ECC stability across all 16 slots.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.