Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM DDR5-5600 96GB ECC RDIMM CL46 1.1V 2Rx4 288-pin Supermicro X14SDW-64CM-SP9F memory upgrade

SKU CH-PCPJ-33KMH

96GB DDR5-5600 registered ECC RDIMM built for the Supermicro X14SDW-64CM-SP9F with CL46 timing and 1.1V operation

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Vis 4 flere konfigurationer
  • 96 GB capacity lets the Supermicro X14SDW-64CM-SP9F run fully populated at rated speed
  • DDR5-5600 PC5-44800 speed matches the board's memory controller for plug-and-play recognition
  • CL46 CAS latency at 1.1 V delivers the exact timing and voltage the platform expects
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the required slot type without adapters or mismatches

Exact-match upgrade for Supermicro X14SDW-64CM-SP9F

This 96GB DDR5-5600 registered ECC RDIMM is built to the precise specification the Supermicro X14SDW-64CM-SP9F memory controller expects. The 2Rx4 rank, 1.1V operating voltage and CL46 timing allow the module to be recognised at full capacity and run at its rated speed without manual tuning. It is intended for administrators who need a drop-in capacity increase for this specific server board.

Capacity and headroom

The kit delivers 96GB in a single 288-pin DDR5 RDIMM operating at 5600 MT/s (PC5-44800). Registered buffering offloads the memory controller so every populated slot can run at full capacity, while on-die ECC corrects single-bit errors before they reach the operating system. Headroom ends when the board's maximum supported DIMM count or total capacity is reached; the manual defines those limits.

Build integration

The module uses the 288-pin RDIMM form factor required by the X14SDW-64CM-SP9F — not UDIMM or SODIMM — and carries no heat spreader, so it fits standard server DIMM slots without clearance issues. Installation follows the motherboard's approved population order, which must be consulted before purchase. No additional cooling or voltage adjustment is needed beyond the board's native 1.1V DDR5 supply.

Fordele

  • 96 GB capacity lets the Supermicro X14SDW-64CM-SP9F run fully populated at rated speed
  • DDR5-5600 PC5-44800 speed matches the board's memory controller for plug-and-play recognition
  • CL46 CAS latency at 1.1 V delivers the exact timing and voltage the platform expects
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the required slot type without adapters or mismatches

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will this 96GB DDR5-5600 2Rx4 RDIMM run at full speed alongside existing 1.1V DDR5 modules on my Supermicro X14SDW-64CM-SP9F?

Yes. This kit matches the board's 1.1V requirement, 5600 MT/s rating and 2Rx4 registered ECC layout, so mixed populations that follow the manual's slot order will operate at the rated speed.

How can I confirm the 96GB DDR5-5600 CL46 RDIMM is recognised correctly after installation?

Check the BIOS memory summary or OS tools such as dmidecode — they should show 96GB total, 5600 MT/s, registered ECC, 2Rx4 organisation and CL46 timings at 1.1V.

Does the MR44800-9624K1 box contain only the 288-pin RDIMM or are cables or a heat spreader included?

The package supplies the 96GB DDR5-5600 2Rx4 1.1V CL46 288-pin ECC RDIMM only; no heat spreader, cables or additional accessories are bundled.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.