Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM DDR5-5600 96GB ECC RDIMM CL46 1.1V 2Rx4 288-pin Supermicro X14SDW-64CM-SP9F memory upgrade

SKU CH-PCPJ-33KMH

96GB DDR5-5600 registered ECC RDIMM built for the Supermicro X14SDW-64CM-SP9F with CL46 timing and 1.1V operation

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Visa 4 fler konfigurationer
  • 96 GB capacity lets the Supermicro X14SDW-64CM-SP9F run fully populated at rated speed
  • DDR5-5600 PC5-44800 speed matches the board's memory controller for plug-and-play recognition
  • CL46 CAS latency at 1.1 V delivers the exact timing and voltage the platform expects
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the required slot type without adapters or mismatches

Exact-match upgrade for Supermicro X14SDW-64CM-SP9F

This 96GB DDR5-5600 registered ECC RDIMM is built to the precise specification the Supermicro X14SDW-64CM-SP9F memory controller expects. The 2Rx4 rank, 1.1V operating voltage and CL46 timing allow the module to be recognised at full capacity and run at its rated speed without manual tuning. It is intended for administrators who need a drop-in capacity increase for this specific server board.

Capacity and headroom

The kit delivers 96GB in a single 288-pin DDR5 RDIMM operating at 5600 MT/s (PC5-44800). Registered buffering offloads the memory controller so every populated slot can run at full capacity, while on-die ECC corrects single-bit errors before they reach the operating system. Headroom ends when the board's maximum supported DIMM count or total capacity is reached; the manual defines those limits.

Build integration

The module uses the 288-pin RDIMM form factor required by the X14SDW-64CM-SP9F — not UDIMM or SODIMM — and carries no heat spreader, so it fits standard server DIMM slots without clearance issues. Installation follows the motherboard's approved population order, which must be consulted before purchase. No additional cooling or voltage adjustment is needed beyond the board's native 1.1V DDR5 supply.

I korthet

  • 96 GB capacity lets the Supermicro X14SDW-64CM-SP9F run fully populated at rated speed
  • DDR5-5600 PC5-44800 speed matches the board's memory controller for plug-and-play recognition
  • CL46 CAS latency at 1.1 V delivers the exact timing and voltage the platform expects
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the required slot type without adapters or mismatches

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will this 96GB DDR5-5600 2Rx4 RDIMM run at full speed alongside existing 1.1V DDR5 modules on my Supermicro X14SDW-64CM-SP9F?

Yes. This kit matches the board's 1.1V requirement, 5600 MT/s rating and 2Rx4 registered ECC layout, so mixed populations that follow the manual's slot order will operate at the rated speed.

How can I confirm the 96GB DDR5-5600 CL46 RDIMM is recognised correctly after installation?

Check the BIOS memory summary or OS tools such as dmidecode — they should show 96GB total, 5600 MT/s, registered ECC, 2Rx4 organisation and CL46 timings at 1.1V.

Does the MR44800-9624K1 box contain only the 288-pin RDIMM or are cables or a heat spreader included?

The package supplies the 96GB DDR5-5600 2Rx4 1.1V CL46 288-pin ECC RDIMM only; no heat spreader, cables or additional accessories are bundled.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.