NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
NVIDIA
Workstation GPU with 48GB GDDR7 ECC memory, 14080 CUDA cores, 440 Tensor cores and 2064 AI TOPS on a PCIe 5.0 x16 interface
The NVIDIA RTX PRO 5000 Blackwell delivers 48GB GDDR7 memory with ECC for engineers, researchers and creators who need large datasets to stay resident on the card. A 512-bit interface and 14080 CUDA cores provide throughput for simulation, rendering and AI training workloads. Four DisplayPort 2.1b outputs drive up to four high-resolution displays from a single board. The PCIe 5.0 x16 link feeds data at modern platform speeds.
Rated at 300W, the card draws auxiliary power through a single PCIe CEM5 16-pin connector. An active dual-slot cooler exhausts heat toward the rear bracket, keeping the full-length 10.5-inch board within thermal limits during sustained compute tasks. Acoustic output scales with load but remains typical for a 300W workstation design. The 4.4-inch width fits standard dual-slot spacing without intruding on adjacent slots.
The full-height full-length form factor requires a case with at least 10.5 inches of clear length and two adjacent rear brackets. A power supply with a native 16-pin connector or a qualified adapter is mandatory for the 300W draw. PCIe 5.0 x16 slots provide full bandwidth; the card also operates in 4.0 or 3.0 slots at reduced link speed. Four display outputs free the builder from adding a second GPU for multi-monitor setups.
| Brand | NVIDIA |
|---|---|
| Series | Blackwell |
| Model | PRO 5000 Blackwell 48G |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU | RTX PRO 5000 |
| CUDA Cores | 14080 |
| Tensor Cores | 440 |
| Memory Size | 48GB |
| Memory Interface | 512-bit |
| Memory Type | GDDR7 with ECC |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.6 |
| DisplayPort | 4x DisplayPort 2.1b |
| AI Features | AI TOPS: 2064 |
| Max Displays Per Board | 4 |
| Virtual Reality Ready | Yes |
| Auxiliary Power Connector | 1x PCIe CEM5 16-pin |
| Power Consumption | 300W |
| Dimensions (L x H) | 4.4 inches x 10.5 inches |
| Slot Width | Dual Slot |
Seat the card in a PCI Express 5.0 x16 slot, then attach the single 16-pin PCIe CEM5 power connector; the step often missed is fully locking that connector until it clicks, otherwise the 300 W limit cannot be met.
The active dual-slot cooler relies on its fans and heatsink; plan to clean dust from the fins and verify fan spin every few months, and replace the thermal paste if temperatures rise above normal after several years.
The 300 W power ceiling is reached before the 48 GB GDDR7 ECC memory or 14080 CUDA cores saturate, so prolonged AI or compute tasks will throttle once the board hits its thermal design power.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?