Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black 80mm square fan with 3-pin connector, no LED

OEM Industries

OEM Industries FBA08A24H 80mm CPU cooler 24V 0.15A 3 Pin

SKU CH-ABJG-CRWEF

80 mm ball-bearing fan runs at 24 V and 0.15 A with a 3-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 80mm square frame fits tight builds
  • 24V 0.15A ball-bearing fan runs reliably
  • 3-pin connector enables speed monitoring
  • Panaflo 8015 model ensures proven airflow
  • 8025 form factor matches standard 80mm mounts

Compact 80 mm 24 V fan for tight builds

The OEM Industries FBA08A24H is an 80 mm square cooler that runs on 24 V at 0.15 A through a three-pin connector. Its ball-bearing motor and 25 mm thickness suit small-form-factor cases, rackmount chassis or embedded boards where a low-profile airflow source is required. No LED lighting is fitted.

Mounts directly to 80 mm fan holes

The frame uses standard 80 mm mounting points so it fits existing case or heatsink cut-outs without adapters. A three-pin header supplies power and a tachometer signal, letting the motherboard or fan controller monitor speed. The 24 V rating means the fan must be driven from a 24 V rail or a compatible inverter supply.

Ball-bearing motor maintains steady airflow under

Ball bearings resist wear better than sleeve types when the fan runs for long periods at constant voltage. The 0.15 A draw stays stable, so acoustic output and cooling capacity do not drift as the system warms up. This makes the unit reliable for servers, industrial PCs or always-on appliances.

Fordele

  • 80mm square frame fits tight builds
  • 24V 0.15A ball-bearing fan runs reliably
  • 3-pin connector enables speed monitoring
  • Panaflo 8015 model ensures proven airflow
  • 8025 form factor matches standard 80mm mounts

Specifikationer

ModelFBA08A24H
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Spørgsmål om denne vare

How much current does the 24 V motor draw during continuous operation?

The fan is rated at 0.15 A on a 24 V supply, so sustained load will pull that same 0.15 A.

What noise and heat level should I expect when the fan runs all day?

Ball-bearing operation at 24 V 0.15 A produces a steady, moderate hum and only slight warmth at the frame.

Which motherboard header do I need to plug this cooler into?

It uses a standard three-pin connector, so any 3-pin fan header on the board will power it.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.