Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black 80mm square fan with 3-pin connector, no LED

OEM Industries

OEM Industries FBA08A24H 80mm CPU cooler 24V 0.15A 3 Pin

SKU CH-ABJG-CRWEF

80 mm ball-bearing fan runs at 24 V and 0.15 A with a 3-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 80mm square frame fits tight builds
  • 24V 0.15A ball-bearing fan runs reliably
  • 3-pin connector enables speed monitoring
  • Panaflo 8015 model ensures proven airflow
  • 8025 form factor matches standard 80mm mounts

Compact 80 mm 24 V fan for tight builds

The OEM Industries FBA08A24H is an 80 mm square cooler that runs on 24 V at 0.15 A through a three-pin connector. Its ball-bearing motor and 25 mm thickness suit small-form-factor cases, rackmount chassis or embedded boards where a low-profile airflow source is required. No LED lighting is fitted.

Mounts directly to 80 mm fan holes

The frame uses standard 80 mm mounting points so it fits existing case or heatsink cut-outs without adapters. A three-pin header supplies power and a tachometer signal, letting the motherboard or fan controller monitor speed. The 24 V rating means the fan must be driven from a 24 V rail or a compatible inverter supply.

Ball-bearing motor maintains steady airflow under

Ball bearings resist wear better than sleeve types when the fan runs for long periods at constant voltage. The 0.15 A draw stays stable, so acoustic output and cooling capacity do not drift as the system warms up. This makes the unit reliable for servers, industrial PCs or always-on appliances.

Pontos fortes

  • 80mm square frame fits tight builds
  • 24V 0.15A ball-bearing fan runs reliably
  • 3-pin connector enables speed monitoring
  • Panaflo 8015 model ensures proven airflow
  • 8025 form factor matches standard 80mm mounts

Especificações

ModelFBA08A24H
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Perguntas sobre este artigo

How much current does the 24 V motor draw during continuous operation?

The fan is rated at 0.15 A on a 24 V supply, so sustained load will pull that same 0.15 A.

What noise and heat level should I expect when the fan runs all day?

Ball-bearing operation at 24 V 0.15 A produces a steady, moderate hum and only slight warmth at the frame.

Which motherboard header do I need to plug this cooler into?

It uses a standard three-pin connector, so any 3-pin fan header on the board will power it.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.