Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

Orico

Orico M.2 NVMe/SATA SSD Enclosure USB 3.2 10Gbps Rose Gold

SKU CH-3XT4-45C05

Aluminium M.2 NVMe and SATA enclosure with USB 3.2 10 Gbps Type-C, 1000 MB/s peak, 2280 support, dual cable, rose gold

  • ColorRose Gold
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Rose Gold

Size M.2 NVMe / NGFF SSD

Model USB 3.2 Gen2 (10Gbps)

  • 10 Gbps USB 3.2 Gen 2 interface delivers up to 1000 MB/s with NVMe drives
  • Aluminium body with CNC-cut fins and full-wrap cooling vest dissipates heat efficiently
  • Single 2280 M.2 bay accepts both NVMe and SATA SSDs
  • Supplied 2-in-1 cable provides USB-C-to-A and USB-C-to-C connections at 10 Gbps
  • UASP and TRIM support maintain drive performance and longevity

Portable SSD enclosure for M.2 drives

The Orico rose-gold case turns a single M.2 2280 NVMe or SATA SSD into a USB 3.2 Gen 2 external drive. It accepts both M-key and B+M-key modules, so most common stick-format SSDs fit without an adapter. The bundled 2-in-1 cable provides USB-C to C and USB-C to A connections for broad host compatibility.

Aluminium body acts as a heatsink

A full-wrap aluminium cooling vest conducts heat away from the SSD on all sides, while CNC-cut stripes increase the surface area for passive dissipation. No fan is fitted, so operation stays silent. The USB 3.2 Gen 2 interface draws power directly from the host port, eliminating the need for a separate power supply.

Tool-free assembly with dual-protocol support

The enclosure slides open for tool-free SSD installation and locks shut with a secure latch. Both NVMe and SATA protocols are supported, though SATA drives are limited to 480 MB/s theoretical throughput while NVMe drives can reach 1000 MB/s. The single-bay design accommodates only one drive at a time.

Fordele

  • 10 Gbps USB 3.2 Gen 2 interface delivers up to 1000 MB/s with NVMe drives
  • Aluminium body with CNC-cut fins and full-wrap cooling vest dissipates heat efficiently
  • Single 2280 M.2 bay accepts both NVMe and SATA SSDs
  • Supplied 2-in-1 cable provides USB-C-to-A and USB-C-to-C connections at 10 Gbps
  • UASP and TRIM support maintain drive performance and longevity

Specifikationer

ColorRose Gold
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I install an M.2 2280 NVMe or SATA SSD into the enclosure, and which step do people often miss?

Slide the SSD into the M‑key or B+M‑key slot at a slight angle, press it down flat, then secure it with the screw; the step many skip is removing the protective film from the thermal pad so the aluminum vest can conduct heat properly.

What maintenance or replacement will this enclosure need over time?

The thermal pad between the SSD and the aluminum cooling vest can dry out or lose contact after extended use; replacing it with a fresh pad of the same thickness restores optimal heat transfer.

What is the first performance limit I will hit during sustained heavy transfers?

With an NVMe drive the USB 3.2 Gen 2 10 Gbps interface caps sustained throughput at about 1000 MB/s, while a SATA drive tops out at 6 Gbps or roughly 480 MB/s regardless of the drive’s own speed.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.