Orico
Orico M.2 NVMe/SATA SSD Enclosure USB 3.2 10Gbps Rose Gold
Aluminium M.2 NVMe and SATA enclosure with USB 3.2 10 Gbps Type-C, 1000 MB/s peak, 2280 support, dual cable, rose gold
- ColorRose Gold
- TypeEnclosure
- MaterialAluminum
- External InterfaceUSB Type C
- HDD Count SupportedSingle SSD
- Number of Bay1 Bay
Size M.2 NVMe / NGFF SSD
- M.2 NVME SSD
- M.2 NGFF SSD
- M.2 NVMe / NGFF SSD
Model USB 3.2 Gen2 (10Gbps)
- USB 3.2 Gen2 (6Gbps)
- USB 3.2 Gen2 (10Gbps)
- USB 4 (40Gbps)
- 10 Gbps USB 3.2 Gen 2 interface delivers up to 1000 MB/s with NVMe drives
- Aluminium body with CNC-cut fins and full-wrap cooling vest dissipates heat efficiently
- Single 2280 M.2 bay accepts both NVMe and SATA SSDs
- Supplied 2-in-1 cable provides USB-C-to-A and USB-C-to-C connections at 10 Gbps
- UASP and TRIM support maintain drive performance and longevity
Portable SSD enclosure for M.2 drives
The Orico rose-gold case turns a single M.2 2280 NVMe or SATA SSD into a USB 3.2 Gen 2 external drive. It accepts both M-key and B+M-key modules, so most common stick-format SSDs fit without an adapter. The bundled 2-in-1 cable provides USB-C to C and USB-C to A connections for broad host compatibility.
Aluminium body acts as a heatsink
A full-wrap aluminium cooling vest conducts heat away from the SSD on all sides, while CNC-cut stripes increase the surface area for passive dissipation. No fan is fitted, so operation stays silent. The USB 3.2 Gen 2 interface draws power directly from the host port, eliminating the need for a separate power supply.
Tool-free assembly with dual-protocol support
The enclosure slides open for tool-free SSD installation and locks shut with a secure latch. Both NVMe and SATA protocols are supported, though SATA drives are limited to 480 MB/s theoretical throughput while NVMe drives can reach 1000 MB/s. The single-bay design accommodates only one drive at a time.
Kohokohdat
- 10 Gbps USB 3.2 Gen 2 interface delivers up to 1000 MB/s with NVMe drives
- Aluminium body with CNC-cut fins and full-wrap cooling vest dissipates heat efficiently
- Single 2280 M.2 bay accepts both NVMe and SATA SSDs
- Supplied 2-in-1 cable provides USB-C-to-A and USB-C-to-C connections at 10 Gbps
- UASP and TRIM support maintain drive performance and longevity
Tekniset tiedot
| Color | Rose Gold |
|---|---|
| Type | Enclosure |
| Material | Aluminum |
| External Interface | USB Type C |
| HDD Count Supported | Single SSD |
| Number of Bay | 1 Bay |
Tämän mallin muut versiot
5 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Orico M.2 SATA SSD enclosure USB 3.2 Gen2 10Gbps Rose Gold
- Rose Gold
- Enclosure
Orico M.2 NVMe/SATA SSD Enclosure USB-C 10Gbps Rose Gold
- Rose Gold
- Enclosure
Orico 10Gbps M.2 NVMe/SATA SSD Enclosure USB 3.2 Gen2 Gray
- Gray
- Enclosure
Kysymyksiä tästä tuotteesta
How do I install an M.2 2280 NVMe or SATA SSD into the enclosure, and which step do people often miss?
Slide the SSD into the M‑key or B+M‑key slot at a slight angle, press it down flat, then secure it with the screw; the step many skip is removing the protective film from the thermal pad so the aluminum vest can conduct heat properly.
What maintenance or replacement will this enclosure need over time?
The thermal pad between the SSD and the aluminum cooling vest can dry out or lose contact after extended use; replacing it with a fresh pad of the same thickness restores optimal heat transfer.
What is the first performance limit I will hit during sustained heavy transfers?
With an NVMe drive the USB 3.2 Gen 2 10 Gbps interface caps sustained throughput at about 1000 MB/s, while a SATA drive tops out at 6 Gbps or roughly 480 MB/s regardless of the drive’s own speed.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Western Digital G-DRIVE ArmorATD 5TB portable hard drive SDPH81G005TGBA1D
OWC Gemini Ultra X6 12TB Thunderbolt portable SSD (OWCTB3GMA6X12)
- 12TB
- Thunderbolt








