Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Gray aluminum M.2 SSD enclosure with CNC-cut cooling fins and USB-C cable

Orico

Orico 10Gbps M.2 NVMe/SATA SSD Enclosure USB 3.2 Gen2 Gray

SKU CH-DBVK-22Q8R

Aluminum M.2 enclosure converts a 2280 NVMe or SATA SSD into a 10 Gbps USB-C portable drive with dual-protocol support and active cooling

  • ColorGray
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Gray

Size M.2 NVMe / NGFF SSD

Model USB 3.2 Gen2 (10Gbps)

  • 10 Gbps USB 3.2 Gen2 interface enables up to 1000 MB/s transfer speeds
  • Aluminum alloy body with CNC-cut fins and cooling vest dissipates heat from the SSD
  • Supports both NVMe and SATA M.2 2280 drives in a single enclosure
  • Included 2-in-1 cable provides USB-C to A and USB-C to C connections at 10 Gbps
  • Tool-free single-bay design turns an internal M.2 SSD into portable external storage

Portable 10Gbps SSD Enclosure

This Orico enclosure turns a single M.2 NVMe or SATA SSD into an external drive with a USB 3.2 Gen2 Type‑C connection. It supports M‑Key, B‑Key and B+M‑Key modules in the 2280 form factor. The theoretical maximum throughput is 1000MB/s for NVMe drives and 480MB/s for SATA drives. An all‑aluminium body with CNC‑cut fins and a wrap‑around cooling vest dissipates heat during sustained transfers.

Check Drive Protocol And Host Port

Verify that your M.2 SSD uses the NVMe or SATA protocol and matches the 2280 length before ordering. The host device must provide a USB‑C port capable of 10Gbps operation to reach the advertised NVMe speeds; a slower port will limit performance. The enclosure draws power from the USB bus, so no external adapter is required.

Aluminium Build With Dual‑Head Cable

The grey aluminium shell acts as a heatsink, and the included cooling vest makes full contact with the drive for silent, fan‑less operation. A single 2‑in‑1 cable supplies both USB‑C‑to‑A and USB‑C‑to‑C plugs, each rated for 10Gbps, letting you connect to legacy Type‑A ports or modern Type‑C ports without extra adapters. The tool‑free sliding cover secures the SSD for daily transport.

Kohokohdat

  • 10 Gbps USB 3.2 Gen2 interface enables up to 1000 MB/s transfer speeds
  • Aluminum alloy body with CNC-cut fins and cooling vest dissipates heat from the SSD
  • Supports both NVMe and SATA M.2 2280 drives in a single enclosure
  • Included 2-in-1 cable provides USB-C to A and USB-C to C connections at 10 Gbps
  • Tool-free single-bay design turns an internal M.2 SSD into portable external storage

Tekniset tiedot

ColorGray
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the enclosure come with a cable or do I need to buy one separately?

A 2-in-1 USB cable is included with USB-C to USB-A and USB-C to USB-C connectors, both rated for 10Gbps.

Should I choose the NVMe or SATA version for a 2280 drive?

This single enclosure supports both NVMe and SATA M.2 2280 drives with M-key, B-key or B+M-key layouts.

Will I actually see 1000MB/s with my NVMe SSD?

The 10Gbps USB 3.2 Gen2 interface allows up to 1000MB/s theoretical throughput; SATA drives are limited to 480MB/s by the 6Gbps protocol.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.