Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rose-gold aluminium M.2 SSD enclosure with USB-C cable

Orico

Orico M.2 NVMe/SATA SSD Enclosure USB-C 10Gbps Rose Gold

SKU CH-R9J8-XQSXG

Houses one M.2 NVMe or SATA SSD (2230–2280) with USB-C 10Gbps, dual cable, and aluminium cooling vest

  • ColorRose Gold
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Rose Gold

Size M.2 NVMe / NGFF SSD

Model USB 3.2 Gen2 (10Gbps)

  • Up to 10Gbps transfer speed with USB 3.2 Gen 2 for rapid NVMe backups
  • Dual-protocol support for NVMe and SATA M.2 drives in 2230 to 2280 sizes
  • Included dual-headed cable provides USB-C to C and USB-C to A connections at 10Gbps
  • Aluminium cooling vest with silicone thermal pad and striped shell improves heat dissipation
  • Backward compatible with USB 3.1 Gen 1 and USB 3.0 for wider device support

Rose Gold M.2 NVMe and SATA enclosure

The Orico enclosure holds one M.2 SSD in 2230, 2242, 2260 or 2280 sizes. It accepts both PCIe NVMe and SATA protocols through a USB Type-C 10Gbps link. An aluminum shell with a cooling vest and thermal pad manages drive temperature.

For portable NVMe storage or SATA migration

Suits users who move a single NVMe drive between USB-C laptops, phones, tablets or consoles using the supplied C-to-A and C-to-C cables. SATA M.2 drives work but are limited to the protocol's 6Gbps ceiling. Buyers needing multi-drive RAID arrays or internal motherboard mounting should look elsewhere.

USB 3.2 Gen2 10Gbps interface

The external connection tops out at 10Gbps, letting an NVMe SSD deliver 1000-1200MB/s sequential throughput. SATA SSDs in the same enclosure cannot exceed 6Gbps. Match the host port to USB 3.2 Gen2 or USB 3.1 Gen1 to reach the rated speeds.

Kohokohdat

  • Up to 10Gbps transfer speed with USB 3.2 Gen 2 for rapid NVMe backups
  • Dual-protocol support for NVMe and SATA M.2 drives in 2230 to 2280 sizes
  • Included dual-headed cable provides USB-C to C and USB-C to A connections at 10Gbps
  • Aluminium cooling vest with silicone thermal pad and striped shell improves heat dissipation
  • Backward compatible with USB 3.1 Gen 1 and USB 3.0 for wider device support

Tekniset tiedot

ColorRose Gold
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What USB standard does the enclosure use and what real-world NVMe speed does it reach?

The enclosure uses USB 3.2 Gen 2 Type-C at 10Gbps; with an NVMe SSD installed, sequential reads and writes hit 1000-1200MB/s.

Which M.2 form factors and key types fit inside the single bay?

The bay accepts 2230, 2242, 2260 and 2280 modules with M-Key, B+M Key (NVMe) or B-Key, B+M Key (SATA) pinouts.

How do you attach the thermal pad and cooling vest during assembly?

Peel the protective film, stick the silicone thermal pad onto the SSD controller, then slide the aluminium cooling vest over the drive before closing the striped shell.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.