Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Gray aluminum M.2 NVMe SSD enclosure with USB-C cable

Orico

Orico M.2 NVMe SSD Enclosure USB-C 10Gbps Aluminum Gray

SKU CH-WGBW-MQXCQ

Aluminum enclosure turns an M.2 NVMe SSD into a 10 Gbps USB-C portable drive with a 2-in-1 cable and full-wrap cooling

  • ColorGray
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Gray

Size M.2 NVME SSD

Model USB 3.2 Gen2 (10Gbps)

  • Turn internal NVMe SSD into portable 1000MB/s storage
  • Aluminum shell with CNC stripes and cooling vest dissipates heat
  • Fits M-key and B+M-key NVMe drives in 2280 size
  • Not compatible with SATA or PCIe AHCI SSDs
  • Included dual-head cable offers USB-C to A and USB-C to C at 10Gbps

USB-C 10Gbps NVMe enclosure for portable storage

This aluminum enclosure converts a single M.2 NVMe SSD into an external drive with a USB-C 10Gbps interface. It supports M-key and B+M-key NVMe modules in the 2280 form factor. The theoretical read and write speed reaches 1000 MB/s, making it suitable for fast data transfer and portable storage workflows.

Tool-free installation with a dual-headed cable

The enclosure uses a slide-open aluminum shell that requires no screws for the drive, while the included 2-in-1 cable provides both USB-C to A and USB-C to C connectors at 10Gbps each. UASP and TRIM are supported for sustained performance. The only common issue is inserting a SATA M.2 drive, which the enclosure does not recognise because it lacks SATA protocol support.

Handles 2280 NVMe drives with active cooling

The all-aluminium body and CNC-cut fins act as a cooling vest that wraps the SSD on all sides, keeping temperatures in check during sustained 1000 MB/s transfers. It accommodates one 2280 NVMe module and cannot accept shorter 2230 or 2242 sizes. SATA M.2, PCIe AHCI and non-NVMe PCIe devices are not supported, so buyers needing those interfaces must choose a different enclosure.

Kohokohdat

  • Turn internal NVMe SSD into portable 1000MB/s storage
  • Aluminum shell with CNC stripes and cooling vest dissipates heat
  • Fits M-key and B+M-key NVMe drives in 2280 size
  • Not compatible with SATA or PCIe AHCI SSDs
  • Included dual-head cable offers USB-C to A and USB-C to C at 10Gbps

Tekniset tiedot

ColorGray
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I know the enclosure is performing at the 1000 MB/s theoretical speed after setup?

Connect the enclosure to a USB 10 Gbps port, run a disk benchmark tool, and verify sequential read and write results approach 1000 MB/s with a supported NVMe drive.

What comes in the box and what must I provide separately?

The package includes the aluminum enclosure, a cooling vest, and a 2-in-1 cable with USB-C to USB-A and USB-C to USB-C connectors; you must supply an M.2 NVMe SSD in 2280 size.

Which M.2 SSD versions does this enclosure accept?

It supports M.2 PCIe NVMe M-Key and B+M-Key drives in the 2280 form factor; M.2 SATA, PCIe AHCI, and other PCIe devices are not compatible.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.