Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Orico

Orico M.2 SATA SSD Enclosure Aluminum USB 3.2 Gen2 2-in-1 Cable Gray

SKU CH-4SGQ-N0175

Aluminum M.2 SATA SSD enclosure with 6 Gbps USB 3.2 Gen 2 and a 2-in-1 USB-C to USB-A/C cable for 2230 to 2280 B-key drives

  • ColorGray
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Gray

Size M.2 NGFF SSD

Model USB 3.2 Gen2 (6Gbps)

  • Turn internal SATA SSDs into portable storage at up to 550 MB/s
  • Aluminum body with CNC-cut fins and wrap-around cooling vest dissipates heat
  • Fits M.2 SATA B-Key and B+M-Key drives in 2230, 2242, 2260 and 2280 sizes
  • Supplied 2-in-1 cable provides USB-C to USB-A and USB-C to USB-C connections
  • USB 3.2 Gen2 interface delivers 10 Gbps bandwidth for fast transfers

Turn an internal SATA SSD into portable storage

The Orico M.2 SATA enclosure accepts B-key or B+M-key drives in 2230, 2242, 2260 and 2280 lengths. It connects over USB 3.2 Gen2 and includes a dual-headed cable with USB-C and USB-A plugs. Theoretical read and write speeds reach 550 MB/s. It is not compatible with NVMe or PCIe SSDs.

Tool-free assembly with a screw-retained lid

Slide the SSD into the M.2 slot, secure it with the captive screw and snap the aluminum shell shut. The included 2-in-1 cable removes the need for separate adapters. A common mistake is inserting an NVMe drive, which fits physically but will not be recognised because the bridge only speaks SATA.

Aluminum body acts as a heatsink under sustained

The CNC-cut alloy chassis wraps the drive and spreads heat across its striped surface. During long sequential transfers the enclosure stays cool enough to maintain the SATA link at its 6 Gbps ceiling without throttling. Performance is limited by the SATA protocol rather than thermal constraints.

Kohokohdat

  • Turn internal SATA SSDs into portable storage at up to 550 MB/s
  • Aluminum body with CNC-cut fins and wrap-around cooling vest dissipates heat
  • Fits M.2 SATA B-Key and B+M-Key drives in 2230, 2242, 2260 and 2280 sizes
  • Supplied 2-in-1 cable provides USB-C to USB-A and USB-C to USB-C connections
  • USB 3.2 Gen2 interface delivers 10 Gbps bandwidth for fast transfers

Tekniset tiedot

ColorGray
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I verify the enclosure is running at the stated 550 MB/s after I connect my M.2 SATA SSD?

The enclosure uses a USB 3.2 Gen2 Type-C interface limited to the SATA 6 Gbps protocol, so the theoretical ceiling is 550 MB/s. Confirm actual throughput by running a sequential read/write benchmark such as CrystalDiskMark on the host computer.

What comes in the box and is anything else needed to install a 2280 SSD?

The package includes the aluminum enclosure with a built-in cooling vest and a 2-in-1 cable that provides both USB-C to USB-A and USB-C to USB-C connections. No extra tools or cables are required for a 2280 drive.

Which SSD keying and length should I select for this gray aluminum model?

Choose an M.2 SATA drive with B-key or B+M-key notches in any of the supported lengths: 2230, 2242, 2260 or 2280. NVMe or PCIe AHCI drives will not work with this enclosure.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.