Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Gray aluminum M.2 NVMe SSD enclosure with USB-C cable

Orico

Orico M.2 NVMe SSD Enclosure USB-C 10Gbps Aluminum Gray

SKU CH-WGBW-MQXCQ

Aluminum enclosure turns an M.2 NVMe SSD into a 10 Gbps USB-C portable drive with a 2-in-1 cable and full-wrap cooling

  • ColorGray
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Gray

Size M.2 NVME SSD

Model USB 3.2 Gen2 (10Gbps)

  • Turn internal NVMe SSD into portable 1000MB/s storage
  • Aluminum shell with CNC stripes and cooling vest dissipates heat
  • Fits M-key and B+M-key NVMe drives in 2280 size
  • Not compatible with SATA or PCIe AHCI SSDs
  • Included dual-head cable offers USB-C to A and USB-C to C at 10Gbps

USB-C 10Gbps NVMe enclosure for portable storage

This aluminum enclosure converts a single M.2 NVMe SSD into an external drive with a USB-C 10Gbps interface. It supports M-key and B+M-key NVMe modules in the 2280 form factor. The theoretical read and write speed reaches 1000 MB/s, making it suitable for fast data transfer and portable storage workflows.

Tool-free installation with a dual-headed cable

The enclosure uses a slide-open aluminum shell that requires no screws for the drive, while the included 2-in-1 cable provides both USB-C to A and USB-C to C connectors at 10Gbps each. UASP and TRIM are supported for sustained performance. The only common issue is inserting a SATA M.2 drive, which the enclosure does not recognise because it lacks SATA protocol support.

Handles 2280 NVMe drives with active cooling

The all-aluminium body and CNC-cut fins act as a cooling vest that wraps the SSD on all sides, keeping temperatures in check during sustained 1000 MB/s transfers. It accommodates one 2280 NVMe module and cannot accept shorter 2230 or 2242 sizes. SATA M.2, PCIe AHCI and non-NVMe PCIe devices are not supported, so buyers needing those interfaces must choose a different enclosure.

Fordele

  • Turn internal NVMe SSD into portable 1000MB/s storage
  • Aluminum shell with CNC stripes and cooling vest dissipates heat
  • Fits M-key and B+M-key NVMe drives in 2280 size
  • Not compatible with SATA or PCIe AHCI SSDs
  • Included dual-head cable offers USB-C to A and USB-C to C at 10Gbps

Specifikationer

ColorGray
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I know the enclosure is performing at the 1000 MB/s theoretical speed after setup?

Connect the enclosure to a USB 10 Gbps port, run a disk benchmark tool, and verify sequential read and write results approach 1000 MB/s with a supported NVMe drive.

What comes in the box and what must I provide separately?

The package includes the aluminum enclosure, a cooling vest, and a 2-in-1 cable with USB-C to USB-A and USB-C to USB-C connectors; you must supply an M.2 NVMe SSD in 2280 size.

Which M.2 SSD versions does this enclosure accept?

It supports M.2 PCIe NVMe M-Key and B+M-Key drives in the 2280 form factor; M.2 SATA, PCIe AHCI, and other PCIe devices are not compatible.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.