Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rose gold aluminium M.2 SSD enclosure with USB-C cable

Orico

Orico M.2 NVMe SATA Enclosure 10Gbps USB 3.2 Rose Gold

SKU CH-F28E-7T06R

Aluminium enclosure converts a 2280 M.2 NVMe or SATA SSD into a 10 Gbps USB 3.2 portable drive with a dual USB-C/USB-A cable

  • ColorRose Gold
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Rose Gold

Size M.2 NVMe / NGFF SSD

Model USB 3.2 Gen2 (10Gbps)

  • Turn internal storage portable with 10 Gbps USB 3.2 Gen 2 speed
  • Achieve up to 1000 MB/s theoretical throughput on NVMe SSDs
  • All-aluminium body with CNC-cut fins and cooling vest draws heat away
  • Accepts M.2 2280 NVMe and SATA drives for broad drive choice
  • Included 2-in-1 cable offers USB-C to USB-A and USB-C to USB-C connections

Single-bay M.2 enclosure for NVMe and SATA SSDs

This Orico enclosure accepts one M.2 SSD in the 2280 form factor and supports both NVMe and SATA protocols. It lets you reuse an internal drive as portable external storage. The aluminium shell acts as a heatsink with CNC-cut fins to spread heat across the surface.

USB 3.2 Gen 2 10 Gbps interface caps real-world

The USB-C connection runs at up to 10 Gbps, so an NVMe drive can approach 1000 MB/s in ideal conditions. A SATA SSD is limited by its own 6 Gbps link, so speeds will be lower regardless of the USB bandwidth. The enclosure cannot overcome the protocol ceiling of the drive installed inside it.

Aluminium body with integrated cooling vest

The all-aluminium chassis wraps the SSD on all sides and uses machined stripes to increase dissipation area. A supplied 2-in-1 cable terminates in both USB-C and USB-A plugs, each rated for 10 Gbps, so the enclosure connects to modern and legacy ports without an extra adapter.

Kohokohdat

  • Turn internal storage portable with 10 Gbps USB 3.2 Gen 2 speed
  • Achieve up to 1000 MB/s theoretical throughput on NVMe SSDs
  • All-aluminium body with CNC-cut fins and cooling vest draws heat away
  • Accepts M.2 2280 NVMe and SATA drives for broad drive choice
  • Included 2-in-1 cable offers USB-C to USB-A and USB-C to USB-C connections

Tekniset tiedot

ColorRose Gold
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick an NVMe or a SATA M.2 2280 SSD for this enclosure?

The enclosure accepts both NVMe and SATA M.2 2280 drives, but a SATA SSD will be limited to 6 Gbps while an NVMe SSD can use the full 10 Gbps USB 3.2 link.

What does the 1000 MB/s theoretical speed mean when I plug it into my laptop?

With an NVMe drive you can approach 1000 MB/s over the 10 Gbps USB 3.2 connection; a SATA drive will top out around 6 Gbps, and real-world throughput also depends on your host port and the SSD itself.

How does the USB 3.2 Gen 2 Type-C interface cap performance in practice?

The USB 3.2 Gen 2 Type-C port provides a 10 Gbps ceiling, so NVMe drives can run near their full speed while SATA drives hit the lower 6 Gbps protocol limit; the included USB-C to A and USB-C to C cables both support the 10 Gbps rate.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.