Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green 240-pin DDR3 ECC registered DIMMs in static bags

OWC

OWC 32GB (2x16GB) DDR3 1333 ECC RDIMM 1R3D32R4032P

SKU CH-7PP8-FRHZK

32 GB DDR3 1333 ECC registered kit for Supermicro SuperServer 6016 and 6026 series

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC protection guards data integrity in servers
  • Registered design stabilises signals for heavy workloads
  • 32 GB kit (2 × 16 GB) expands Supermicro 6016 and 6026 systems
  • DDR3 1333 CL9 matches factory speed and timing
  • 5 V 240-pin RDIMM drops in without voltage changes

System-Specific ECC RDIMM Kit

This OWC kit delivers 32GB of DDR3 1333 registered ECC memory in a matched pair of 16GB modules. It is built for Supermicro SuperServer 6016T, 6016TT, 6016XT, 6026T and 6026TT platforms that require 240-pin RDIMMs. The modules run at 1.5V with CL9 latency and a 2Rx4 organisation. They replace Supermicro part MEMDR316LSL05ER13 directly.

Suited For

Server administrators upgrading or repairing the listed Supermicro SuperServer models will find a validated, plug-in replacement. Buyers who need unbuffered desktop memory, a different DDR generation, non-ECC modules, or capacities beyond 32GB cannot use this kit. It also cannot be mixed with unbuffered DIMMs in the same system.

Registered ECC Decides Fit

The single specification that determines compatibility is the registered ECC RDIMM design. Only systems that explicitly support 240-pin DDR3 registered ECC modules at 1333MHz can accept this memory. Verify the server manual for RDIMM support before purchase.

Fordele

  • ECC protection guards data integrity in servers
  • Registered design stabilises signals for heavy workloads
  • 32 GB kit (2 × 16 GB) expands Supermicro 6016 and 6026 systems
  • DDR3 1333 CL9 matches factory speed and timing
  • 5 V 240-pin RDIMM drops in without voltage changes

Specifikationer

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 6016T Series
Supermicro SuperServer 6016TT Series
Supermicro SuperServer 6016XT Series
Supermicro SuperServer 6026T Series
Supermicro SuperServer 6026TT Series

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does this kit require a Supermicro SuperServer 6016T, 6016TT, 6016XT, 6026T or 6026TT system to work?

Yes, the 32GB DDR3 1333 ECC registered DIMM kit is validated for those Supermicro SuperServer series and replaces Supermicro part MEMDR316LSL05ER13.

Can I keep my existing unbuffered DDR3 modules and add this registered kit alongside them?

No, registered ECC RDIMMs cannot be mixed with unbuffered memory; all slots must use registered modules of the same type.

How can I verify the kit is running at the correct 1333 MHz CL9 speed after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should report DDR3 1333 (PC3-10600) at CL9 latency for each 16 GB module.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.