Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green 240-pin DDR3 ECC registered DIMMs in static bags

OWC

OWC 32GB (2x16GB) DDR3 1333 ECC RDIMM 1R3D32R4032P

SKU CH-7PP8-FRHZK

32 GB DDR3 1333 ECC registered kit for Supermicro SuperServer 6016 and 6026 series

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC protection guards data integrity in servers
  • Registered design stabilises signals for heavy workloads
  • 32 GB kit (2 × 16 GB) expands Supermicro 6016 and 6026 systems
  • DDR3 1333 CL9 matches factory speed and timing
  • 5 V 240-pin RDIMM drops in without voltage changes

System-Specific ECC RDIMM Kit

This OWC kit delivers 32GB of DDR3 1333 registered ECC memory in a matched pair of 16GB modules. It is built for Supermicro SuperServer 6016T, 6016TT, 6016XT, 6026T and 6026TT platforms that require 240-pin RDIMMs. The modules run at 1.5V with CL9 latency and a 2Rx4 organisation. They replace Supermicro part MEMDR316LSL05ER13 directly.

Suited For

Server administrators upgrading or repairing the listed Supermicro SuperServer models will find a validated, plug-in replacement. Buyers who need unbuffered desktop memory, a different DDR generation, non-ECC modules, or capacities beyond 32GB cannot use this kit. It also cannot be mixed with unbuffered DIMMs in the same system.

Registered ECC Decides Fit

The single specification that determines compatibility is the registered ECC RDIMM design. Only systems that explicitly support 240-pin DDR3 registered ECC modules at 1333MHz can accept this memory. Verify the server manual for RDIMM support before purchase.

Pluspunten

  • ECC protection guards data integrity in servers
  • Registered design stabilises signals for heavy workloads
  • 32 GB kit (2 × 16 GB) expands Supermicro 6016 and 6026 systems
  • DDR3 1333 CL9 matches factory speed and timing
  • 5 V 240-pin RDIMM drops in without voltage changes

Specificaties

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 6016T Series
Supermicro SuperServer 6016TT Series
Supermicro SuperServer 6016XT Series
Supermicro SuperServer 6026T Series
Supermicro SuperServer 6026TT Series

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does this kit require a Supermicro SuperServer 6016T, 6016TT, 6016XT, 6026T or 6026TT system to work?

Yes, the 32GB DDR3 1333 ECC registered DIMM kit is validated for those Supermicro SuperServer series and replaces Supermicro part MEMDR316LSL05ER13.

Can I keep my existing unbuffered DDR3 modules and add this registered kit alongside them?

No, registered ECC RDIMMs cannot be mixed with unbuffered memory; all slots must use registered modules of the same type.

How can I verify the kit is running at the correct 1333 MHz CL9 speed after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should report DDR3 1333 (PC3-10600) at CL9 latency for each 16 GB module.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.