Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR4 RDIMM modules with gold contacts and black chips

OWC

OWC 32GB (2x16GB) DDR4 2400 ECC Registered RDIMM Cisco UCS C240 M4 memory upgrade

SKU CH-K8J9-D6D6K

32GB dual-channel DDR4 2400 ECC registered RDIMM kit for Cisco UCS C240 M4 servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • 32 GB kit expands server capacity
  • ECC registered design prevents data errors
  • DDR4 2400 speed matches system specs
  • 2 V operation reduces power draw
  • Direct replacement for Cisco UCS C240 M4

32GB DDR4 2400 ECC RDIMM kit

This OWC upgrade kit provides 32GB of DDR4 2400 memory across two 16GB registered DIMMs. Each module runs at PC4-19200 with CL17 latency and 1.2V voltage. The 288-pin ECC RDIMM form factor is built for Cisco UCS C240 M4 servers and replaces Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG. The product is new and ready for installation.

Suits Cisco UCS C240 M4 upgrades

This memory fits administrators expanding a Cisco UCS C240 M4 server with validated ECC registered modules. It will not work in standard desktop computers or consumer motherboards that require unbuffered non-ECC DIMMs. Systems needing load-reduced ECC memory or different pin counts must use alternative parts. Mixing with unbuffered or load-reduced memory is not supported.

Registered ECC DDR4 2400 specification

The registered ECC design with 1Rx4 organisation is the single specification that determines compatibility with the Cisco UCS C240 M4 memory controller. Unbuffered or load-reduced modules will not function in this platform. The DDR4 2400 speed and 1.2V operation match the server's qualified memory profile. Verify your system requires registered ECC before purchase.

Fordele

  • 32 GB kit expands server capacity
  • ECC registered design prevents data errors
  • DDR4 2400 speed matches system specs
  • 2 V operation reduces power draw
  • Direct replacement for Cisco UCS C240 M4

Specifikationer

BrandOWC
Part Number2R4D41R4032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemCisco UCS C240 M4

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will the 2400 MHz CL17 registered ECC modules work alongside my existing DDR4 2400 registered ECC DIMMs in the Cisco UCS C240 M4?

Yes, the kit uses the same DDR4 2400 PC4-19200 CL17 1.2 V registered ECC specification, so it can populate empty slots beside identical modules.

How can I verify the 32 GB kit is recognised at 2400 MHz with ECC active after installation?

Check the server BIOS or Cisco UCS Manager — it should show 32 GB total, 2400 MT/s speed and ECC enabled for the new DIMMs.

Does the upgrade kit include only the two 16 GB RDIMMs or are any tools or cables supplied?

The package contains two 16 GB 288-pin DDR4 2400 CL17 1Rx4 1.2 V ECC registered RDIMMs; no tools or cables are included.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.