Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 32GB (2x16GB) DDR4 2400 ECC Registered RDIMM Cisco UCS C240 M4 memory upgrade

SKU CH-K8J9-D6D6K

32GB dual-channel DDR4 2400 ECC registered RDIMM kit for Cisco UCS C240 M4 servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • 32 GB kit expands server capacity
  • ECC registered design prevents data errors
  • DDR4 2400 speed matches system specs
  • 2 V operation reduces power draw
  • Direct replacement for Cisco UCS C240 M4

32GB DDR4 2400 ECC RDIMM kit

This OWC upgrade kit provides 32GB of DDR4 2400 memory across two 16GB registered DIMMs. Each module runs at PC4-19200 with CL17 latency and 1.2V voltage. The 288-pin ECC RDIMM form factor is built for Cisco UCS C240 M4 servers and replaces Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG. The product is new and ready for installation.

Suits Cisco UCS C240 M4 upgrades

This memory fits administrators expanding a Cisco UCS C240 M4 server with validated ECC registered modules. It will not work in standard desktop computers or consumer motherboards that require unbuffered non-ECC DIMMs. Systems needing load-reduced ECC memory or different pin counts must use alternative parts. Mixing with unbuffered or load-reduced memory is not supported.

Registered ECC DDR4 2400 specification

The registered ECC design with 1Rx4 organisation is the single specification that determines compatibility with the Cisco UCS C240 M4 memory controller. Unbuffered or load-reduced modules will not function in this platform. The DDR4 2400 speed and 1.2V operation match the server's qualified memory profile. Verify your system requires registered ECC before purchase.

Kohokohdat

  • 32 GB kit expands server capacity
  • ECC registered design prevents data errors
  • DDR4 2400 speed matches system specs
  • 2 V operation reduces power draw
  • Direct replacement for Cisco UCS C240 M4

Tekniset tiedot

BrandOWC
Part Number2R4D41R4032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemCisco UCS C240 M4

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 2400 MHz CL17 registered ECC modules work alongside my existing DDR4 2400 registered ECC DIMMs in the Cisco UCS C240 M4?

Yes, the kit uses the same DDR4 2400 PC4-19200 CL17 1.2 V registered ECC specification, so it can populate empty slots beside identical modules.

How can I verify the 32 GB kit is recognised at 2400 MHz with ECC active after installation?

Check the server BIOS or Cisco UCS Manager — it should show 32 GB total, 2400 MT/s speed and ECC enabled for the new DIMMs.

Does the upgrade kit include only the two 16 GB RDIMMs or are any tools or cables supplied?

The package contains two 16 GB 288-pin DDR4 2400 CL17 1Rx4 1.2 V ECC registered RDIMMs; no tools or cables are included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.