Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Eight green 240-pin DDR3L ECC registered DIMMs in a row

OWC

OWC 64GB (8x8GB) DDR3L 1333 PC3L-10600 CL9 ECC RDIMM memory upgrade

SKU CH-WH0X-1CZ91

64GB kit of eight 8GB DDR3L 1333 ECC registered RDIMMs at 1.35V for Cisco UCS B230 M1 servers

  • Capacity64GB (8 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes

Capacity 64GB (8 x 8GB)

  • ECC registered design prevents data errors in servers
  • 64GB kit with eight 8GB modules maximises capacity
  • DDR3L 1333 CL9 at 1.35V cuts power draw
  • 240-pin RDIMM fits Cisco UCS B230 M1 slots
  • Replaces Cisco part numbers N01M308GB2 and UCSMR series

Server-grade ECC RDIMM kit

This OWC kit supplies 64 GB of DDR3L registered ECC memory across eight 8 GB modules. It is built for the Cisco UCS B230 M1 blade server and other workstations or NAS systems that require 240-pin DDR3L RDIMMs. The modules will not work in standard desktop computers or alongside unbuffered or load-reduced DIMMs.

240-pin registered form factor

Each stick uses a 240-pin DDR3L interface at 1.35 V with a 2Rx4 organisation and no heat spreader. Registered buffering and ECC correction mean the memory presents a single electrical load per channel, allowing the platform to populate all slots reliably. The low-profile design fits the dense blade chassis without clearance issues.

DDR3L 1333 at CL9 latency

Operating at PC3L-10600 speed with CAS latency 9, the kit delivers the bandwidth and error detection the B230 M1 expects. The 1.35 V DDR3L voltage reduces power draw compared with standard DDR3 while maintaining stability under sustained server workloads. No active cooling is required on the modules themselves.

Fordele

  • ECC registered design prevents data errors in servers
  • 64GB kit with eight 8GB modules maximises capacity
  • DDR3L 1333 CL9 at 1.35V cuts power draw
  • 240-pin RDIMM fits Cisco UCS B230 M1 slots
  • Replaces Cisco part numbers N01M308GB2 and UCSMR series

Specifikationer

BrandOWC
Part Number1R3T32R4064K
Capacity64GB (8 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B230 M1

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What speed does the DDR3L 1333 PC3L-10600 interface actually run at in the Cisco UCS B230 M1?

The modules are rated for DDR3L 1333 (PC3L-10600) and will operate at up to 1333 MT/s in the Cisco UCS B230 M1, subject to the platform's memory controller and population rules.

What physical slot and form factor do these 240-pin RDIMMs require?

Each module is a 240-pin DDR3L ECC Registered DIMM (RDIMM) measuring 1.35 V; it installs only in DDR3 240-pin RDIMM sockets keyed for registered memory.

What is the correct installation sequence for the eight 8 GB modules in the Cisco UCS B230 M1?

Populate the DIMM slots per the Cisco UCS B230 M1 service guide — typically filling one channel per CPU at a time, matching rank and capacity per channel — and never mix these registered DIMMs with unbuffered or load-reduced modules.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.