Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 64GB (8x8GB) DDR3L 1333 PC3L-10600 CL9 ECC RDIMM memory upgrade

SKU CH-WH0X-1CZ91

64GB kit of eight 8GB DDR3L 1333 ECC registered RDIMMs at 1.35V for Cisco UCS B230 M1 servers

  • Capacity64GB (8 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes

Capacity 64GB (8 x 8GB)

  • ECC registered design prevents data errors in servers
  • 64GB kit with eight 8GB modules maximises capacity
  • DDR3L 1333 CL9 at 1.35V cuts power draw
  • 240-pin RDIMM fits Cisco UCS B230 M1 slots
  • Replaces Cisco part numbers N01M308GB2 and UCSMR series

Server-grade ECC RDIMM kit

This OWC kit supplies 64 GB of DDR3L registered ECC memory across eight 8 GB modules. It is built for the Cisco UCS B230 M1 blade server and other workstations or NAS systems that require 240-pin DDR3L RDIMMs. The modules will not work in standard desktop computers or alongside unbuffered or load-reduced DIMMs.

240-pin registered form factor

Each stick uses a 240-pin DDR3L interface at 1.35 V with a 2Rx4 organisation and no heat spreader. Registered buffering and ECC correction mean the memory presents a single electrical load per channel, allowing the platform to populate all slots reliably. The low-profile design fits the dense blade chassis without clearance issues.

DDR3L 1333 at CL9 latency

Operating at PC3L-10600 speed with CAS latency 9, the kit delivers the bandwidth and error detection the B230 M1 expects. The 1.35 V DDR3L voltage reduces power draw compared with standard DDR3 while maintaining stability under sustained server workloads. No active cooling is required on the modules themselves.

Kohokohdat

  • ECC registered design prevents data errors in servers
  • 64GB kit with eight 8GB modules maximises capacity
  • DDR3L 1333 CL9 at 1.35V cuts power draw
  • 240-pin RDIMM fits Cisco UCS B230 M1 slots
  • Replaces Cisco part numbers N01M308GB2 and UCSMR series

Tekniset tiedot

BrandOWC
Part Number1R3T32R4064K
Capacity64GB (8 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B230 M1

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What speed does the DDR3L 1333 PC3L-10600 interface actually run at in the Cisco UCS B230 M1?

The modules are rated for DDR3L 1333 (PC3L-10600) and will operate at up to 1333 MT/s in the Cisco UCS B230 M1, subject to the platform's memory controller and population rules.

What physical slot and form factor do these 240-pin RDIMMs require?

Each module is a 240-pin DDR3L ECC Registered DIMM (RDIMM) measuring 1.35 V; it installs only in DDR3 240-pin RDIMM sockets keyed for registered memory.

What is the correct installation sequence for the eight 8 GB modules in the Cisco UCS B230 M1?

Populate the DIMM slots per the Cisco UCS B230 M1 service guide — typically filling one channel per CPU at a time, matching rank and capacity per channel — and never mix these registered DIMMs with unbuffered or load-reduced modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.