OWC 16GB (2x8GB) DDR3L 1333 PC3L-10600 CL9 ECC RDIMM memory upgrade
- 16GB (2 x 8GB)
- 240-Pin DDR3L ECC R…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB kit of four 8 GB DDR3L 1333 ECC registered RDIMMs for Cisco UCS B440 M1 and C460 M2 servers
Capacity 32GB (4 x 8GB)
This 32 GB kit contains four 8 GB DDR3L 1333 ECC registered RDIMMs built for Cisco UCS B440 M1 and C460 M2 systems. It runs at 1.35 V with CL9 latency and a 2Rx4 organisation. The modules are designed for workstation and server platforms that require registered error-correcting memory.
Registered buffering and ECC let the memory controller manage larger capacities and detect single-bit errors without involving the CPU. The kit replaces Cisco part numbers N01M308GB2, UCSMR1X082RXA, UCSMR2X082RXB and UCSMR2X082RXC. It cannot be mixed with unbuffered or load-reduced DIMMs.
Verify that your system board accepts 240-pin DDR3L registered ECC modules at 1.35 V and that the BIOS supports 8 GB dual-rank DIMMs. Standard desktop boards and consumer laptops will not post with this memory. Buyers who need unbuffered or non-ECC modules should look elsewhere.
| Brand | OWC |
|---|---|
| Part Number | 1R3T32R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B440 M1 Cisco UCS C460 M2 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
No firmware updates or scheduled reseating are required; the modules are validated for the B440 M1 and C460 M2 and run at the JEDEC-standard 1.35 V.
Each module draws 1.35 V at DDR3L 1333 speeds with no heat spreader, so the platform’s DIMM-slot airflow limit is reached before any module-level throttle point.
The kit operates at the standard 1.35 V DDR3L voltage without heat spreaders, so thermal output and acoustic impact match the baseline for registered DDR3L 1333 modules in the supported Cisco chassis.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?