OWC 16GB (2x8GB) DDR3L 1333 PC3L-10600 CL9 ECC RDIMM memory upgrade
- 16GB (2 x 8GB)
- 240-Pin DDR3L ECC R…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
32 GB kit of four 8 GB DDR3L 1333 ECC registered RDIMMs for Cisco UCS B440 M1 and C460 M2 servers
Capacity 32GB (4 x 8GB)
This 32 GB kit contains four 8 GB DDR3L 1333 ECC registered RDIMMs built for Cisco UCS B440 M1 and C460 M2 systems. It runs at 1.35 V with CL9 latency and a 2Rx4 organisation. The modules are designed for workstation and server platforms that require registered error-correcting memory.
Registered buffering and ECC let the memory controller manage larger capacities and detect single-bit errors without involving the CPU. The kit replaces Cisco part numbers N01M308GB2, UCSMR1X082RXA, UCSMR2X082RXB and UCSMR2X082RXC. It cannot be mixed with unbuffered or load-reduced DIMMs.
Verify that your system board accepts 240-pin DDR3L registered ECC modules at 1.35 V and that the BIOS supports 8 GB dual-rank DIMMs. Standard desktop boards and consumer laptops will not post with this memory. Buyers who need unbuffered or non-ECC modules should look elsewhere.
| Brand | OWC |
|---|---|
| Part Number | 1R3T32R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B440 M1 Cisco UCS C460 M2 |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
No firmware updates or scheduled reseating are required; the modules are validated for the B440 M1 and C460 M2 and run at the JEDEC-standard 1.35 V.
Each module draws 1.35 V at DDR3L 1333 speeds with no heat spreader, so the platform’s DIMM-slot airflow limit is reached before any module-level throttle point.
The kit operates at the standard 1.35 V DDR3L voltage without heat spreaders, so thermal output and acoustic impact match the baseline for registered DDR3L 1333 modules in the supported Cisco chassis.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?