OWC 16GB (2x8GB) DDR3L 1333 PC3L-10600 CL9 ECC RDIMM memory upgrade
- 16GB (2 x 8GB)
- 240-Pin DDR3L ECC R…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
32 GB kit of four 8 GB DDR3L 1333 ECC registered RDIMMs for Cisco UCS B440 M1 and C460 M2 servers
Capacity 32GB (4 x 8GB)
This 32 GB kit contains four 8 GB DDR3L 1333 ECC registered RDIMMs built for Cisco UCS B440 M1 and C460 M2 systems. It runs at 1.35 V with CL9 latency and a 2Rx4 organisation. The modules are designed for workstation and server platforms that require registered error-correcting memory.
Registered buffering and ECC let the memory controller manage larger capacities and detect single-bit errors without involving the CPU. The kit replaces Cisco part numbers N01M308GB2, UCSMR1X082RXA, UCSMR2X082RXB and UCSMR2X082RXC. It cannot be mixed with unbuffered or load-reduced DIMMs.
Verify that your system board accepts 240-pin DDR3L registered ECC modules at 1.35 V and that the BIOS supports 8 GB dual-rank DIMMs. Standard desktop boards and consumer laptops will not post with this memory. Buyers who need unbuffered or non-ECC modules should look elsewhere.
| Brand | OWC |
|---|---|
| Part Number | 1R3T32R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B440 M1 Cisco UCS C460 M2 |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
No firmware updates or scheduled reseating are required; the modules are validated for the B440 M1 and C460 M2 and run at the JEDEC-standard 1.35 V.
Each module draws 1.35 V at DDR3L 1333 speeds with no heat spreader, so the platform’s DIMM-slot airflow limit is reached before any module-level throttle point.
The kit operates at the standard 1.35 V DDR3L voltage without heat spreaders, so thermal output and acoustic impact match the baseline for registered DDR3L 1333 modules in the supported Cisco chassis.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?