Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR3L desktop memory modules with black heat spreaders and gold contacts

RIMLANCE

RIMLANCE 16GB (2x8GB) DDR3L-1600 CL11 Desktop RAM

SKU CH-ECBH-M4GC3

Dual-channel 16 GB DDR3L-1600 kit with CL11 latency and 1.35 V operation

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Multi-channel KitDual Channel Kit
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR3L-1600 CL11 runs at 1.35 V for cooler operation
  • Unbuffered non-ECC design fits standard desktop slots
  • Major-brand chipset delivers tested stability under load
  • 2Rx8 organisation supports dense 8 GB modules per stick

16GB DDR3L dual-channel kit

This RIMLANCE kit provides 16GB of desktop memory in a matched pair of 8GB modules. It runs at DDR3-1600 (PC3L-12800) with CL11 latency and operates at the low 1.35V voltage of the DDR3L standard. The unbuffered, non-ECC DIMMs use major-brand chipsets and are designed as a direct replacement for the CT2K102464BD160B part number.

DDR3L system upgraders.

The kit suits owners of desktop systems that specifically support DDR3L memory at 1.35V and can use a dual-channel 2x8GB configuration. Buyers whose motherboards require standard 1.5V DDR3 modules or single-rank DIMMs should verify compatibility before purchasing, as this kit uses 2Rx8 dual-rank chips at the lower voltage.

1.35V DDR3L voltage decides fit

The single specification that determines whether this memory works is the 1.35V operating voltage required by the DDR3L standard. Systems that only accept 1.5V DDR3 will not run these modules correctly, while DDR3L-capable platforms will benefit from the lower power draw and the 1600 MT/s speed rating.

Fordele

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR3L-1600 CL11 runs at 1.35 V for cooler operation
  • Unbuffered non-ECC design fits standard desktop slots
  • Major-brand chipset delivers tested stability under load
  • 2Rx8 organisation supports dense 8 GB modules per stick

Specifikationer

BrandRIMLANCE
ModelEquivalent for CT2K102464BD160B
Part NumberRUD12800D8C2K16
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset

Spørgsmål om denne vare

Does this kit need a motherboard with DDR3L slots that accept 1.35 V modules?

Yes, the modules are DDR3L rated at 1.35 V and require a desktop board with DDR3L-compatible slots to operate correctly.

Will the CL11 latency change if I keep my existing DDR3-1600 sticks alongside this kit?

The kit runs at CL11; mixing with other DDR3-1600 modules will make the system run at the slowest common timings across all installed sticks.

How can I confirm the system is using the full 16 GB at 1600 MT/s after installation?

Check the memory speed and total capacity in BIOS or a tool like CPU-Z; both should show 16 GB and a DRAM frequency near 800 MHz (DDR3-1600).

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.