SanDisk SD8SN8U-256G-1122 X400 256GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Enterprise
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
SanDisk
512 GB M.2 2280 SATA SSD with 540 MB/s reads, 520 MB/s writes and 1.75 million-hour MTTF for enterprise workloads
The SanDisk X400 SD8SN8U-512G-1122 is a 512GB internal solid state drive built for enterprise workloads. It uses a M.2 2280 form factor with a SATA III interface and sixth-generation TLC flash memory. Sequential reads reach up to 540 MBps and writes up to 520 MBps. The drive measures 1.5mm in height for slim system compatibility.
This drive suits users running heavy workloads such as photo and video editing, multitasking or office productivity in ultrathin designs. It offers endurance up to 320 TBW with nCache 2.0, DataGuard client and LDPC error correction for data integrity. Buyers needing a 2.5 inch 7mm drive should select that form factor instead.
The single specification that decides fit is the SATA III interface, which limits throughput to the SATA bus rather than PCIe lanes. Verify the host system provides a SATA-wired M.2 slot before purchase. Operating temperature ranges from 0°C to 70°C with shock resistance rated at 1500G.
| Brand | SanDisk |
|---|---|
| Series | X400 |
| Model | SD8SN8U-512G-1122 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 540 MBps |
| Max Sequential Write | Up to 520 MBps |
| 4KB Random Read | Up to 93,500 IOPS |
| 4KB Random Write | Up to 75,000 IOPS |
| MTTF | Up to 1.75M hours |
| Features | Up to 1TB in A Single-sided M.2 2280 and 2.5" 7mm Form Factors Ncache 2.0 Maximizes Read/write Operations and Improves Responsiveness Greater Reliability With Dataguard Client and The New Ldpc Error Correction Mechanism Available In 128GB, 256GB, 512GB, and 1TB Capacities in Both 2.5" 7mm and M.2 2280 Form Factor Better Slumber Mode For Greater Low Power Efficiency TCG Opal 2.0 Support |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -55°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | Operating: 5.0 gRMS, 10 - 2000 Hz Non-operating: 4.9 gRMS, 7 - 800 Hz |
| Height | 1.50mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| Forsendelsesvægt | 0.03 kg |
| Pakkestørrelse | 109 × 64 × 8 mm |
Andre versioner af denne model
Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.
Yes, the drive uses the standard M.2 2280 form factor with a 1.5mm single-sided profile, so it fits any M.2 2280 slot that accepts SATA signalling.
Insert the drive at an angle, press it flat, and fasten the single retention screw; the step often missed is fully tightening that screw so the drive stays seated under vibration.
The drive is rated for up to 320 TBW, which represents the total host writes the TLC memory is warranted to sustain.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?