Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Silver 2U rackmount chassis with twelve front hot-swap drive bays

Silverstone

Silverstone RM22-312 2U 12-bay 2.5" / 3.5" server chassis

SKU CH-N2Z2-5Q4SW MPN RM22-312

A 2U rackmount chassis holding twelve hot-swap 2.5" or 3.5" SAS/SATA drives with 12 Gb/s Mini-SAS HD backplane, three 80mm PWM fans, and seven low-profile expansion slots

  • Chassis TypeRackmount
  • Twelve drive bays accept both 2.5" and 3.5" SAS or SATA drives
  • 12 Gb/s Mini-SAS HD SFF-8643 backplane delivers high-speed storage connectivity
  • Three hot-swappable 80mm PWM fans provide cooling with continuous operation
  • Supports E-ATX and SSI-EEB motherboards for flexible server builds
  • Seven low-profile PCI or PCIe expansion slots add I/O capacity

Storage density and motherboard support

The Silverstone RM22-312 is a 2U rackmount chassis built to hold twelve hot-swap trays that accept both 2.5" and 3.5" SAS or SATA drives. It fits E-ATX, SSI-EEB and smaller server boards, giving integrators a dense platform for storage-heavy workloads. The backplane connects every bay through three Mini-SAS HD SFF-8643 links running at 12 Gb/s with SGPIO signalling.

Cooling, drive access and expansion

Three 80mm x 38mm hot-swappable PWM fans provide front-to-rear airflow while the system stays online. Each drive tray shows an independent status LED so technicians can identify a failed disk without guesswork. Seven low-profile PCI or PCIe slots sit behind the motherboard area, and two front USB 3.1 Gen 1 Type-A ports give quick local access for diagnostics or media.

CPU cooler height limit

The internal clearance above the socket tops out at 68mm, so only low-profile coolers will fit. Builds that need tower coolers or liquid blocks taller than this cannot use the chassis. The unit ships without a power supply, accepting either a single or redundant 2U module.

Fordele

  • Twelve drive bays accept both 2.5" and 3.5" SAS or SATA drives
  • 12 Gb/s Mini-SAS HD SFF-8643 backplane delivers high-speed storage connectivity
  • Three hot-swappable 80mm PWM fans provide cooling with continuous operation
  • Supports E-ATX and SSI-EEB motherboards for flexible server builds
  • Seven low-profile PCI or PCIe expansion slots add I/O capacity

Specifikationer

Chassis TypeRackmount
Forsendelsesvægt15.42 kg
Pakkestørrelse25 × 25 × 25 mm

Spørgsmål om denne vare

What throughput does the Mini-SAS HD SFF-8643 interface cap at for the twelve drive bays?

The backplane connects twelve SAS or SATA drives through three Mini-SAS HD SFF-8643 ports rated at 12 Gb/s each, so the interface ceiling is 12 Gb/s per port.

What motherboard form factors and CPU cooler height does the 2U chassis accept?

It fits SSI-EEB, SSI-CEB, E-ATX, ATX, Micro-ATX and Mini-ITX boards, and the CPU cooler must not exceed 68 mm in height.

How are the three 80 mm PWM fans installed, and what mistake should be avoided?

The fans are hot-swappable; slide each unit into the front fan tray until it clicks, and do not force a fan in upside-down or the PWM connector will not seat.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.