Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

Simmtec, Inc

Simmtec, Inc 2GB Kit (2×1GB) DDR PC2700 333MHz 184-pin Non-ECC desktop RAM

SKU CH-34H9-M863X

A 2 GB desktop memory kit of two 1 GB DDR PC2700 modules running at 333 MHz with 184 pins, non-ECC unbuffered operation at 2.5 V

  • Capacity2GB
  • 2GB total capacity in a matched 2×1GB kit
  • DDR PC2700 rating at 333MHz for compatible desktops
  • 184-pin DIMM form factor fits standard DDR slots
  • Non-ECC unbuffered design for everyday desktop use
  • Operates at 2.5V with premium brand memory chips

2GB DDR PC2700 Kit for Legacy Desktops

This kit provides two 1GB unbuffered DIMMs rated at PC2700 333MHz with 184 pins. It is intended for older desktop systems that require DDR memory running at 2.5 volts. The modules use standard non-ECC chips suitable for typical office or home PCs of that era.

Suitable for Dual-Slot Upgrades

Buyers needing to populate two slots on a compatible motherboard will find this matched pair convenient. Systems limited to a single memory slot, or boards that require ECC or registered modules, cannot use this kit. It also does not serve machines that have moved to later DDR generations.

PC2700 333MHz Speed Rating

The decisive specification is the PC2700 rating at 333MHz, which determines whether the motherboard and chipset can run the memory at its rated frequency. If the board only supports slower DDR speeds, the modules will downclock; if it requires faster DDR, this kit will not meet the requirement.

Fordele

  • 2GB total capacity in a matched 2×1GB kit
  • DDR PC2700 rating at 333MHz for compatible desktops
  • 184-pin DIMM form factor fits standard DDR slots
  • Non-ECC unbuffered design for everyday desktop use
  • Operates at 2.5V with premium brand memory chips

Specifikationer

Capacity2GB

Spørgsmål om denne vare

Will the 184-pin DIMM fit my motherboard's DDR slots?

Yes, the 184-pin DIMM is the standard physical format for DDR PC2700 desktop memory and fits any motherboard slot designed for this memory type.

What is the correct way to install the two 1GB modules, and what step is often missed?

Align the notch on each module with the slot key, press down firmly until both side clips snap shut automatically, and ensure the paired modules occupy the correct colour-coded slots for dual-channel operation.

When will the 2.5 V DDR PC2700 modules need replacement?

These non-ECC unbuffered modules have no moving parts and require no scheduled replacement; they remain in service until a capacity upgrade is desired or a rare chip failure occurs.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.