BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278135BTC
På lager
SK hynix
SK hynix 16GB 2x8GB DDR4 2133MHz CL15 1.20V Green UDIMM desktop RAM
16 GB dual-channel DDR4 kit at 2133 MHz, CL15, 1.20 V, unbuffered 288-pin DIMMs
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered
- 16 GB total capacity from two 8 GB modules
- DDR4 2133 speed for responsive desktop performance
- CL15 CAS latency for quick data access
- 20 V operation reduces power draw
- Green 288-pin UDIMM fits standard desktop slots
Kit Composition
This kit contains two 8 GB DDR4 UDIMM modules for a total of 16 GB. It is built for desktop systems that accept 288-pin unbuffered memory running at 1.20 V. The green circuit boards carry no LEDs.
What the Pair Changes
Populating two slots in matched capacity lets the memory controller run in dual-channel mode, doubling the data path compared with a single module. The CL15 timing at 2133 MHz is the only speed grade supplied; no XMP profiles or higher frequencies are included.
DDR4 Bus Limits
The DDR4 interface tops out at the PC4-17000 data rate, so bandwidth cannot exceed what the 2133 MT/s clock provides. Systems that require ECC, registered modules or voltages other than 1.20 V will not work with this kit.
Fordele
- 16 GB total capacity from two 8 GB modules
- DDR4 2133 speed for responsive desktop performance
- CL15 CAS latency for quick data access
- 20 V operation reduces power draw
- Green 288-pin UDIMM fits standard desktop slots
Specifikationer
| Brand | Hynix |
|---|---|
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Green |
| LED Color | None |
Spørgsmål om denne vare
Will these two 8 GB modules work together as a 16 GB kit in my desktop?
Yes, the pack contains two matched 8 GB DDR4 UDIMMs designed to run together at 2133 MHz with CL15 timing.
My motherboard has 288-pin DDR4 slots — is the physical fit guaranteed?
Each stick is a standard 288-pin unbuffered DDR4 DIMM, so it will seat in any desktop DDR4 slot.
Do I need to change any BIOS voltage settings for these sticks?
The modules operate at the standard 1.20 V, so no manual voltage adjustment is required.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00280722BTC
På lager
