Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black 80mm square Nidec case fan with transparent blades and central hub, 25mm thick, two-wire 24V connector visible

SXDOOL

SXDOOL D08T-24TS4 24V 0.26A 80mm Nidec case fan

SKU CH-VCZF-41HPW MPN D08T-24TS4

24V 80mm Nidec fan spins at 4500 RPM pushing 26 CFM with 42 dB noise and 40,000-hour double-ball bearing life

  • High airflow with 26 CFM and 6.8 m/s wind speed
  • Strong static pressure of 0.33 in-H2O for restricted spaces
  • Quiet operation at 42 dB noise level
  • Long-life double ball bearing rated for 40,000 hours
  • 24 V 0.26 A design draws only 5.52 W

Compact 24 V 80 mm Nidec fan

The SXDOOL D08T-24TS4 is an 80 mm square frame fan built around a Nidec motor rated for 24 V and 0.26 A. It spins at 4500 RPM ±10 % and moves 26 CFM with a static pressure of 0.33 in-H2O. The two-wire design delivers power only, without speed reporting or PWM control.

Suited for tight 24 V chassis slots.

This unit fits servers, industrial enclosures or custom rigs that supply 24 V directly to a two-pin header and need 1.51 m³/min airflow in an 80 × 80 × 25 mm space. Builders who require motherboard PWM control, variable speed curves or a three- or four-pin connector should look elsewhere.

Steady output within -10 °C to 70 °C range

The double-ball bearing is rated for 40 000 hours of continuous operation at up to 70 °C ambient. At full speed the fan produces 42 dB noise and 5.52 W draw, maintaining its 6.8 m/s wind speed without thermal throttling. Performance stays consistent across the stated temperature window.

Fordele

  • High airflow with 26 CFM and 6.8 m/s wind speed
  • Strong static pressure of 0.33 in-H2O for restricted spaces
  • Quiet operation at 42 dB noise level
  • Long-life double ball bearing rated for 40,000 hours
  • 24 V 0.26 A design draws only 5.52 W

Specifikationer

Der er endnu ikke offentliggjort specifikationer for denne vare.

Spørgsmål om denne vare

What power source must I already have to run this 24 V, 0.26 A fan?

You need a 24 V supply that can deliver at least 0.26 A (5.52 W) with a two-wire positive and negative connection; the fan has no PWM or tachometer wire.

Can I plug this 80 mm, 25 mm thick fan into a standard 3-pin or 4-pin motherboard header?

No — the fan uses a bare two-wire lead for 24 V DC only; it lacks the third or fourth pin used by typical motherboard headers for speed control or monitoring.

How do I confirm the fan is spinning at its rated 4500 RPM after installation?

Measure the current draw — it should read about 0.26 A at 24 V — and check that exhaust airflow reaches roughly 1.51 m³/min (26 CFM) with a noise level near 42 dB.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.