저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black 80mm square Nidec case fan with transparent blades and central hub, 25mm thick, two-wire 24V connector visible

SXDOOL

SXDOOL D08T-24TS4 24V 0.26A 80mm Nidec case fan

SKU CH-VCZF-41HPW MPN D08T-24TS4

24V 80mm Nidec fan spins at 4500 RPM pushing 26 CFM with 42 dB noise and 40,000-hour double-ball bearing life

  • High airflow with 26 CFM and 6.8 m/s wind speed
  • Strong static pressure of 0.33 in-H2O for restricted spaces
  • Quiet operation at 42 dB noise level
  • Long-life double ball bearing rated for 40,000 hours
  • 24 V 0.26 A design draws only 5.52 W

Compact 24 V 80 mm Nidec fan

The SXDOOL D08T-24TS4 is an 80 mm square frame fan built around a Nidec motor rated for 24 V and 0.26 A. It spins at 4500 RPM ±10 % and moves 26 CFM with a static pressure of 0.33 in-H2O. The two-wire design delivers power only, without speed reporting or PWM control.

Suited for tight 24 V chassis slots.

This unit fits servers, industrial enclosures or custom rigs that supply 24 V directly to a two-pin header and need 1.51 m³/min airflow in an 80 × 80 × 25 mm space. Builders who require motherboard PWM control, variable speed curves or a three- or four-pin connector should look elsewhere.

Steady output within -10 °C to 70 °C range

The double-ball bearing is rated for 40 000 hours of continuous operation at up to 70 °C ambient. At full speed the fan produces 42 dB noise and 5.52 W draw, maintaining its 6.8 m/s wind speed without thermal throttling. Performance stays consistent across the stated temperature window.

주요 특징

  • High airflow with 26 CFM and 6.8 m/s wind speed
  • Strong static pressure of 0.33 in-H2O for restricted spaces
  • Quiet operation at 42 dB noise level
  • Long-life double ball bearing rated for 40,000 hours
  • 24 V 0.26 A design draws only 5.52 W

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

What power source must I already have to run this 24 V, 0.26 A fan?

You need a 24 V supply that can deliver at least 0.26 A (5.52 W) with a two-wire positive and negative connection; the fan has no PWM or tachometer wire.

Can I plug this 80 mm, 25 mm thick fan into a standard 3-pin or 4-pin motherboard header?

No — the fan uses a bare two-wire lead for 24 V DC only; it lacks the third or fourth pin used by typical motherboard headers for speed control or monitoring.

How do I confirm the fan is spinning at its rated 4500 RPM after installation?

Measure the current draw — it should read about 0.26 A at 24 V — and check that exhaust airflow reaches roughly 1.51 m³/min (26 CFM) with a noise level near 42 dB.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.