Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Rectangular beige tower with nine vertical M.2 slots on top

Systor

Systor SYSNVME-YL06REG09 1-to-9 NVMe/SATA Duplicator 36GB/min

SKU CH-E30Q-0RKS4

Standalone duplicator copies up to nine NVMe or SATA M.2 drives at 36 GB per minute and supports 2230 to 2280 form factors

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)18 x 8.25 x 6

TARGET SIZE 1 to 09

DATA TRANSFER RATE 36.0GB/min [600MB/sec] NO HDD RACK

  • Standalone operation with no computer required
  • Copies up to nine drives simultaneously at 36GB/min
  • Supports M.2 sizes 2230, 2242, 2260 and 2280 with B, M and B+M keys
  • Optional adapters add 2.5" and 3.5" SATA SSD/HDD compatibility
  • Downloadable event log records job results and drive details

Standalone M.2 NVMe/SATA duplicator

The Systor SYSNVME-YL06REG09 is a standalone duplicator that copies or sanitises up to nine M.2 drives at once without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 form factors and also supports 2.5 inch or 3.5 inch SATA drives through optional adapters.

Copy speed limited by source

The unit advertises a maximum throughput of 36 GB per minute with a 600 MB/s interface rate, but actual duplication speed varies with the read and write capabilities of the specific master and blank drives used. Speed does not degrade as more target ports are populated during a session.

Verify M.2 key type and physical size before

The duplicator handles B key, M key and B+M key modules up to 22 mm wide, so confirm that your drives match these keying and length specifications. If you plan to duplicate 2.5 inch or 3.5 inch SATA drives, the required adapters are sold separately and are not included with the duplicator.

Fordele

  • Standalone operation with no computer required
  • Copies up to nine drives simultaneously at 36GB/min
  • Supports M.2 sizes 2230, 2242, 2260 and 2280 with B, M and B+M keys
  • Optional adapters add 2.5" and 3.5" SATA SSD/HDD compatibility
  • Downloadable event log records job results and drive details

Specifikationer

BrandSystor
ModelSYSNVME-YL06REG09
Part NumberSYSNVME-YL06REG09
TypeHard Drive Duplicator
Target1 to 9
Data Transfer Rate600MB/s
Operating TypeStandalone
Dimensions (H x W x D)18 x 8.25 x 6

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I choose a 2230, 2242, 2260 or 2280 M.2 drive for the duplicator?

The unit accepts all four M.2 lengths — 2230, 2242, 2260 and 2280 — so select the length that matches the drives you need to copy.

What does the 36 GB per minute rate mean when I run a copy job?

It is the maximum throughput the duplicator can sustain; actual speed will vary with the read and write performance of the source and target drives.

Does the duplicator use a PCIe or SATA interface for NVMe drives?

It supports both NVMe and SATA M.2 drives directly, and SATA SSD or HDD drives via optional adapters.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.