Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular beige tower with nine vertical M.2 slots on top

Systor

Systor SYSNVME-YL06REG09 1-to-9 NVMe/SATA Duplicator 36GB/min

SKU CH-E30Q-0RKS4

Standalone duplicator copies up to nine NVMe or SATA M.2 drives at 36 GB per minute and supports 2230 to 2280 form factors

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)18 x 8.25 x 6

TARGET SIZE 1 to 09

DATA TRANSFER RATE 36.0GB/min [600MB/sec] NO HDD RACK

  • Standalone operation with no computer required
  • Copies up to nine drives simultaneously at 36GB/min
  • Supports M.2 sizes 2230, 2242, 2260 and 2280 with B, M and B+M keys
  • Optional adapters add 2.5" and 3.5" SATA SSD/HDD compatibility
  • Downloadable event log records job results and drive details

Standalone M.2 NVMe/SATA duplicator

The Systor SYSNVME-YL06REG09 is a standalone duplicator that copies or sanitises up to nine M.2 drives at once without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 form factors and also supports 2.5 inch or 3.5 inch SATA drives through optional adapters.

Copy speed limited by source

The unit advertises a maximum throughput of 36 GB per minute with a 600 MB/s interface rate, but actual duplication speed varies with the read and write capabilities of the specific master and blank drives used. Speed does not degrade as more target ports are populated during a session.

Verify M.2 key type and physical size before

The duplicator handles B key, M key and B+M key modules up to 22 mm wide, so confirm that your drives match these keying and length specifications. If you plan to duplicate 2.5 inch or 3.5 inch SATA drives, the required adapters are sold separately and are not included with the duplicator.

Pluspunten

  • Standalone operation with no computer required
  • Copies up to nine drives simultaneously at 36GB/min
  • Supports M.2 sizes 2230, 2242, 2260 and 2280 with B, M and B+M keys
  • Optional adapters add 2.5" and 3.5" SATA SSD/HDD compatibility
  • Downloadable event log records job results and drive details

Specificaties

BrandSystor
ModelSYSNVME-YL06REG09
Part NumberSYSNVME-YL06REG09
TypeHard Drive Duplicator
Target1 to 9
Data Transfer Rate600MB/s
Operating TypeStandalone
Dimensions (H x W x D)18 x 8.25 x 6

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Should I choose a 2230, 2242, 2260 or 2280 M.2 drive for the duplicator?

The unit accepts all four M.2 lengths — 2230, 2242, 2260 and 2280 — so select the length that matches the drives you need to copy.

What does the 36 GB per minute rate mean when I run a copy job?

It is the maximum throughput the duplicator can sustain; actual speed will vary with the read and write performance of the source and target drives.

Does the duplicator use a PCIe or SATA interface for NVMe drives?

It supports both NVMe and SATA M.2 drives directly, and SATA SSD or HDD drives via optional adapters.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.