Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

Zyvpee

Zyvpee GB1245PKVX-8 45x20mm 12V 1.2W 3-pin blower case fan

SKU CH-RHRR-735E2

45×20 mm 12 V 1.2 W ball-bearing blower fan with 3-pin connector for Optoma X316ST, DT5603, EW610ST and VE28X projectors

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Ball bearing ensures reliable long-life operation
  • 45 × 20 mm blower fits Optoma X316ST DT5603 EW610ST VE28X
  • 12 V 1.2 W design keeps power draw low
  • Three-pin connector enables simple motherboard control
  • Sub-1600 RPM rating limits acoustic noise

Compact blower for projector cooling

The Zyvpee GB1245PKVX-8 is a 45 by 20 millimetre blower fan designed to fit the tight ducting of compatible Optoma projectors such as the X316ST, DT5603, EW610ST and VE28X. It runs on 12 volts and draws 1.2 watts through a standard three-pin connector. Ball bearings keep the rotor stable at speeds below 1600 RPM.

Three-pin voltage control only

The three-pin interface supplies power and a tachometer signal but does not support PWM speed regulation. Fan speed therefore varies with the supplied voltage rather than a digital duty cycle. Builders who need motherboard-controlled PWM curves or software fan profiles cannot use this connector for that purpose.

Dimensions and airflow direction decide fit

The 45 by 20 millimetre frame and blower-style exhaust determine whether the unit matches the original projector shroud. If the replacement requires a different footprint, thickness or axial airflow pattern, this model will not install correctly.

Fordele

  • Ball bearing ensures reliable long-life operation
  • 45 × 20 mm blower fits Optoma X316ST DT5603 EW610ST VE28X
  • 12 V 1.2 W design keeps power draw low
  • Three-pin connector enables simple motherboard control
  • Sub-1600 RPM rating limits acoustic noise

Specifikationer

BrandZyvpee
SeriesGB1245PKVX-8
ModelGB1245PKVX-8
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesProjector Cooling
Dimensions45*20MM

Spørgsmål om denne vare

Is the GB1245PKVX-8 the only version offered for this 45 mm blower?

The listing shows a single model, GB1245PKVX-8, with 12 V, 1.2 W and a 3-pin connector; no alternative capacities or speeds are mentioned.

What does the <1600 RPM rating mean once the fan is installed in a projector?

The blower will spin at up to 1600 revolutions per minute, moving air through the 45 mm by 20 mm frame to cool the projector’s internal components.

What does the 3-pin connector cap in practice for speed control?

The 3-pin power connector supplies 12 V and a tachometer signal, allowing the host device to monitor speed but not to vary voltage for PWM control.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.