Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small black blower fan, 45 by 20 mm, three-wire connector

Zyvpee

Zyvpee GB1245PKVX-8 45x20mm 12V 1.2W 3-pin blower case fan

SKU CH-RHRR-735E2

45×20 mm 12 V 1.2 W ball-bearing blower fan with 3-pin connector for Optoma X316ST, DT5603, EW610ST and VE28X projectors

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Ball bearing ensures reliable long-life operation
  • 45 × 20 mm blower fits Optoma X316ST DT5603 EW610ST VE28X
  • 12 V 1.2 W design keeps power draw low
  • Three-pin connector enables simple motherboard control
  • Sub-1600 RPM rating limits acoustic noise

Compact blower for projector cooling

The Zyvpee GB1245PKVX-8 is a 45 by 20 millimetre blower fan designed to fit the tight ducting of compatible Optoma projectors such as the X316ST, DT5603, EW610ST and VE28X. It runs on 12 volts and draws 1.2 watts through a standard three-pin connector. Ball bearings keep the rotor stable at speeds below 1600 RPM.

Three-pin voltage control only

The three-pin interface supplies power and a tachometer signal but does not support PWM speed regulation. Fan speed therefore varies with the supplied voltage rather than a digital duty cycle. Builders who need motherboard-controlled PWM curves or software fan profiles cannot use this connector for that purpose.

Dimensions and airflow direction decide fit

The 45 by 20 millimetre frame and blower-style exhaust determine whether the unit matches the original projector shroud. If the replacement requires a different footprint, thickness or axial airflow pattern, this model will not install correctly.

Points forts

  • Ball bearing ensures reliable long-life operation
  • 45 × 20 mm blower fits Optoma X316ST DT5603 EW610ST VE28X
  • 12 V 1.2 W design keeps power draw low
  • Three-pin connector enables simple motherboard control
  • Sub-1600 RPM rating limits acoustic noise

Caractéristiques

BrandZyvpee
SeriesGB1245PKVX-8
ModelGB1245PKVX-8
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesProjector Cooling
Dimensions45*20MM

Questions sur cet article

Is the GB1245PKVX-8 the only version offered for this 45 mm blower?

The listing shows a single model, GB1245PKVX-8, with 12 V, 1.2 W and a 3-pin connector; no alternative capacities or speeds are mentioned.

What does the <1600 RPM rating mean once the fan is installed in a projector?

The blower will spin at up to 1600 revolutions per minute, moving air through the 45 mm by 20 mm frame to cool the projector’s internal components.

What does the 3-pin connector cap in practice for speed control?

The 3-pin power connector supplies 12 V and a tachometer signal, allowing the host device to monitor speed but not to vary voltage for PWM control.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.