LetLinkSo PCIe 4.0 x4 to Oculink SFF-8612 Adapter Card
- PCIe to Oculink Ada…
- PCIe 4.0
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
LetLinkSo
Adds an Oculink SFF-8612 x4 port via a PCIe 4.0 x1 slot for NVMe SSDs or eGPUs at 16 GT/s per lane
Adapter Type PCIe x1 to 1-Port Oculink / External
Οι διαγραμμένες εκδόσεις υπάρχουν, αλλά δεν είναι διαθέσιμες εδώ.
This adapter adds an Oculink SFF-8612 x4 interface through a PCIe x1 slot. It targets builders connecting NVMe SSDs or eGPU docks using an SFF-8611 cable. Systems must run Windows, Windows Server or Linux. The card fits a single expansion slot and requires no extra drivers.
The link operates at the PCIe 4.0 standard with a 16 GT/s per lane rate across the x1 electrical connection. Real-world throughput is limited by the single lane rather than the x4 Oculink receptacle. Heavy sequential workloads will saturate the upstream lane before the downstream port reaches its nominal ceiling. Thermal output remains low because the board draws minimal power.
Insert the card into any free PCIe x1 slot and attach the SFF-8611 cable to the SFF-8612 port. The welded connector housing resists damage during repeated mating cycles. Boot support is included, but the host BIOS must expose the slot in PCIe or NVMe mode; some platforms require forcing Gen 3 and a cold restart. Buyers without a PCIe slot cannot use this adapter.
| Brand | LetLinkSo |
|---|---|
| Series | PCIe to Oculink Card |
| Model | LLS-CD-1PC1OC-03 |
| Type | PCIe to Oculink Adapter |
| Standard | PCIe 4.0 |
| Data Transfer Rate | 16GT/s (per lane) |
| Operating Systems Supported | Windows,Windows Server and Linux |
| Compatibility | PCIe 4.0 |
| Specifications | PCIe x1 to 1-port Oculink |
| Features | EXPANDED CONNECTIVITY |
| Weight | 1 lbs |
| Package Contents | 1 x PCIe x1 to 1-port Oculink Adapter |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
The adapter itself is passive and draws minimal power; sustained heat depends on the attached NVMe drive or eGPU rather than the card.
You need an Oculink SFF-8611 cable and a compatible NVMe SSD or eGPU enclosure with an SFF-8611 input.
Yes, it is backward compatible and will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 x1 slot.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;