Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

LetLinkSo

LetLinkSo LLS-CD-1PC1OC-03 PCIe 4.0 x1 to Oculink SFF-8612 Adapter

SKU CH-C76R-T6CEP

Adds an Oculink SFF-8612 x4 port via a PCIe 4.0 x1 slot for NVMe SSDs or eGPUs at 16 GT/s per lane

  • TypePCIe to Oculink Adapter
  • StandardPCIe 4.0
  • Data Transfer Rate16GT/s (per lane)
  • Operating Systems SupportedWindows,Windows Server and Linux
  • CompatibilityPCIe 4.0
  • SpecificationsPCIe x1 to 1-port Oculink

Adapter Type PCIe x1 to 1-Port Oculink / External

Les versions barrées existent, mais ne sont pas disponibles ici.

  • Add Oculink SFF-8612 x4 connectivity via PCIe x1 slot
  • 16 GT/s per lane transfer rate with PCIe 4.0 standard
  • Welded connector housing for secure and durable connection
  • Supports bootable NVMe devices for system startup flexibility
  • Driver-free operation on Windows Server and Linux

PCIe 4.0 x1 to Oculink SFF-8612 Adapter

This adapter adds an Oculink SFF-8612 x4 interface through a PCIe x1 slot. It targets builders connecting NVMe SSDs or eGPU docks using an SFF-8611 cable. Systems must run Windows, Windows Server or Linux. The card fits a single expansion slot and requires no extra drivers.

Sustained transfer behaviour

The link operates at the PCIe 4.0 standard with a 16 GT/s per lane rate across the x1 electrical connection. Real-world throughput is limited by the single lane rather than the x4 Oculink receptacle. Heavy sequential workloads will saturate the upstream lane before the downstream port reaches its nominal ceiling. Thermal output remains low because the board draws minimal power.

Installation notes

Insert the card into any free PCIe x1 slot and attach the SFF-8611 cable to the SFF-8612 port. The welded connector housing resists damage during repeated mating cycles. Boot support is included, but the host BIOS must expose the slot in PCIe or NVMe mode; some platforms require forcing Gen 3 and a cold restart. Buyers without a PCIe slot cannot use this adapter.

Points forts

  • Add Oculink SFF-8612 x4 connectivity via PCIe x1 slot
  • 16 GT/s per lane transfer rate with PCIe 4.0 standard
  • Welded connector housing for secure and durable connection
  • Supports bootable NVMe devices for system startup flexibility
  • Driver-free operation on Windows Server and Linux

Caractéristiques

BrandLetLinkSo
SeriesPCIe to Oculink Card
ModelLLS-CD-1PC1OC-03
TypePCIe to Oculink Adapter
StandardPCIe 4.0
Data Transfer Rate16GT/s (per lane)
Operating Systems SupportedWindows,Windows Server and Linux
CompatibilityPCIe 4.0
SpecificationsPCIe x1 to 1-port Oculink
FeaturesEXPANDED CONNECTIVITY
Weight1 lbs
Package Contents1 x PCIe x1 to 1-port Oculink Adapter

Autres versions de ce modèle

3 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Does the PCIe 4.0 x1 link add noticeable heat or power draw when the Oculink SFF-8612 port runs all day?

The adapter itself is passive and draws minimal power; sustained heat depends on the attached NVMe drive or eGPU rather than the card.

What must I already own to connect an NVMe SSD or eGPU through the SFF-8612 port?

You need an Oculink SFF-8611 cable and a compatible NVMe SSD or eGPU enclosure with an SFF-8611 input.

Will this card work in an older PCIe 3.0 x1 slot on my current motherboard?

Yes, it is backward compatible and will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 x1 slot.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.