LetLinkSo PCIe 4.0 x4 to Oculink SFF-8612 Adapter Card
- PCIe to Oculink Ada…
- PCIe 4.0
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
LetLinkSo
Adds an Oculink SFF-8612 x4 port via a PCIe 4.0 x1 slot for NVMe SSDs or eGPUs at 16 GT/s per lane
Adapter Type PCIe x1 to 1-Port Oculink / External
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This adapter adds an Oculink SFF-8612 x4 interface through a PCIe x1 slot. It targets builders connecting NVMe SSDs or eGPU docks using an SFF-8611 cable. Systems must run Windows, Windows Server or Linux. The card fits a single expansion slot and requires no extra drivers.
The link operates at the PCIe 4.0 standard with a 16 GT/s per lane rate across the x1 electrical connection. Real-world throughput is limited by the single lane rather than the x4 Oculink receptacle. Heavy sequential workloads will saturate the upstream lane before the downstream port reaches its nominal ceiling. Thermal output remains low because the board draws minimal power.
Insert the card into any free PCIe x1 slot and attach the SFF-8611 cable to the SFF-8612 port. The welded connector housing resists damage during repeated mating cycles. Boot support is included, but the host BIOS must expose the slot in PCIe or NVMe mode; some platforms require forcing Gen 3 and a cold restart. Buyers without a PCIe slot cannot use this adapter.
| Brand | LetLinkSo |
|---|---|
| Series | PCIe to Oculink Card |
| Model | LLS-CD-1PC1OC-03 |
| Type | PCIe to Oculink Adapter |
| Standard | PCIe 4.0 |
| Data Transfer Rate | 16GT/s (per lane) |
| Operating Systems Supported | Windows,Windows Server and Linux |
| Compatibility | PCIe 4.0 |
| Specifications | PCIe x1 to 1-port Oculink |
| Features | EXPANDED CONNECTIVITY |
| Weight | 1 lbs |
| Package Contents | 1 x PCIe x1 to 1-port Oculink Adapter |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The adapter itself is passive and draws minimal power; sustained heat depends on the attached NVMe drive or eGPU rather than the card.
You need an Oculink SFF-8611 cable and a compatible NVMe SSD or eGPU enclosure with an SFF-8611 input.
Yes, it is backward compatible and will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 x1 slot.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?